Used Cnc Lathes in Wisconsin, USA

2009 DMG MORI GILDEMEISTER CTX beta 1250 TC 064366

• used

• Manufacturer: DMG Mori
• Model: CTX BETA 1250 TC

Number of axis: 5-Axis | Tool changer: 24 ATC | Control: SIEMENS 840D | Y axis: 3.93" (100 mm) | B axis: +/- 110 degrees | Spindle number: 2 | Spindle 1: 4,000 rpm | Spindle 2: 5,000 rpm

MORI SEIKI NTX 2000/1500 SZM

• used

• Manufacturer: Mori Seiki
• Model: NTX-2000/1500SZM

Status: Available | Number of axis: 5-Axis | Tool changer: 38 ATC | Control: MSX-711-IV | B axis: 0.0001 degree | Spindle number: 2 | Turret number: 1 | Spindle 1: 5,000 rpm | Turret 1: 10 station | Spindle 2: 5...

SPINNER TTC300-52

• used

• Manufacturer: Spinner

Status: Available | Control: SIEMENS 840DE | Y axis: +/- 1.57" (+/- 40 mm) | Spindle number: 2 | Turret number: 2 | Spindle 1: 5,000 rpm | Turret 1: 16 Position | Spindle 2: 7,000 rpm | Turret 2: 12 Position

2008 INDEX C200

• used

• Manufacturer: Index
• Model: C200

Equipped With: INDEX control system C200-4D with flat screen display Chip conveyor INDEX MBL bar loading magazine KLH Kaltetechnik external chiller KNOLL paper band filter unit HAINBUCH SPANNTOP collet chuc...

2008 INDEX C200

• used

• Manufacturer: Index
• Model: C200

TRAUB INDEX TRAUB TNL 18-9 dynamic

• used

• Manufacturer: Index
• Model: Traub

Status: Available | Number of axis: 9-Axis

2018 Okuma GENOS L300-M-e Lathe w/ Bar Feeder and Conveyor

• used

• Manufacturer: Okuma
• Model: GENOS L300

Model: GENOS L300-M-e | Spindle rpm: 4,500 | Max turning diameter: 8.66" | Tool stations: 12 | Axis: C | Chuck size & type: 8" Hydraulic Hollow Chuck | Control: OSP-P300LA-e | Main spindle: SPIN SYNCH. TAP

2016 INDEX G250 5-Axis Turn-Mill Center

• used

• Manufacturer: Index
• Model: G250

2010 DMG MORI CTX beta 1250 TC Turn Mill Center

• used

• Manufacturer: DMG Mori
• Model: CTX BETA 1250 TC

2015 DMG MORI GILDEMEISTER CTX beta 800 TC 5-Axis Turn-Mill Center

• used

• Manufacturer: DMG Mori
• Model: CTX BETA 800 TC

Machine was manufactured at Gildemeister Drehmaschinen GmbH in Bielefeld, Germany Approximately only 7,815 program run time hours over the LIFE of the machine: (<4 years of use on average, on a 1 shift basis) ...

2009 DMG MORI GILDEMEISTER CTX beta 1250 TC 5-Axis Turn-Mill center

• used

• Manufacturer: DMG Mori
• Model: CTX BETA 1250 TC

**NEW spindle and NEW window just installed in 2024** 4,000 rpm main spindle 5,000 rpm sub spindle Mist-Fit oil mist extractor B-Axis milling head This machine has been fully aligned and is running parts cur...

1999 Daewoo LYNX 200B

• used

• Manufacturer: Daewoo
• Model: Lynx 200B

Daewoo Lynx 200B CNC Lathe Daewoo Lynx 200B, 11" Max. Ø, 11.8" Max. Length, 1.75" Max. Bar, 18" Swing Over Bed, 20" Between Centers, 6.3" X-Travel, 13" Z-Travel, 2" Spindle Bore, Coolant System, Rigid Tapping, Pa...