Used Mineral Processing

Flotation Cells Accessory Package

Flotation cell accessory packages: - new induction motors - Blowers - Sheaves - Belts - Level control systems - Spare parts D'Angelo International can outfit your new or existing flotation cells with a range of a...

Galigher Agitair flotation cell with 20 HP (15 kW) motor 1770 RPM

• Manufacturer: Galigher

2 Units available- GALIGHER AGITAIR Flotation Cells - 20 HP (15 kW) motors - 1770 RPM

Unused Surplus Wemco 66 Flotation Cells with Mechanisms

• Manufacturer: Wemco

- Two banks of two cells, four cells of 72 cu ft each, unused - Four new flotation mechanisms - Two used flotation mechanisms - Complete with impellers, diffusers and dispenser skirts

Galigher Agitair Flotation Mechanisms

• Manufacturer: Galigher

Galigher Agitair Flotation Mechanisms 7 units 76.5 in. overall length - SOLD - 26.25 in. diameter rubber coated steel rotors - rubber coated shafts 10 units, 62 in overall length - 17.25 in. diameter rubber coate...

Deister No. 6 Concentrating Table

• Manufacturer: Deister

Black rubber covers Handles a variety of feed sizes Handles ores, minerals, crushed slags, and drosses General Model Specifications: MFG. Capacities: Coarse Sand - 2.3 TPH Medium Sand - 1.4 TPH Fine Sand - 0.9 TP...

Knelson MD30 Gold Concentrator

• Manufacturer: Knelson

General Model Specifications: Feed Size: Discharge type: Manual Discharge | Bowl: Poly G4 Bowl | Feed capacity: 30-40 Tons/Hr (27.3-36.3 Tonnes/hr.) Solids | Typical fluidization water requirement: 75-110 GPM (17...

Deister No.6 Concentrating Table

• Manufacturer: Deister

Full Size Diagonal Deck MFG. Capacities: Coarse Sand - 2.3 TPH Medium Sand - 1.4 TPH Fine Sand - 0.9 TPH Slime - 0.4 TPH Particle Top Size Coarse Sand - 10 Mesh (2.0mm) Medium Sand - 48 Mesh (0.30mm) Fine Sand - ...

Eimco 4ft x 4ft Disc Filter Package

• Manufacturer: Eimco

Chain Driven With Drive Motor and Gear Reducer Package Includes: Simplex Diaphragm Feed Pump 50HP Spencer Turbo Air Blower 50HP Nash Vacuum Pump Filtrate Pump Filtrate Tank Product Discharge Conveyor

5 x 3 ft (1.5 x 1 m) SAG mill with 20 HP

- Skid mounted - Chain-driven with rollers under shell - Falk gearbox Motor: - 20 HP (15 kW) - 1750 RPM - 256T frame - 230/460 V - 3 Ph - 60 Hz

13.5 x 4 ft (4 x 1.2 m) Marcy SAG mill with 300 HP

- 13.5 x 4 ft shell - Originally designed for dry grinding - removed, disassembled, and in storage ready for inspection and shipping - Mill trunnions and wear parts protected during storage - Trunnion bearings cl...

24 x 8 ft (7.3 x 2.5 m) Hardinge SAG Mill with 3,000 HP

• Manufacturer: Hardinge

- 2 Flender gearboxes - Liners quoted separately - 3,000 HP GE synchronous motor - Mill is disassembled and in storage

24 x 9 ft (7.3 x 2.7 m) Boliden Allis SAG Mill with 3,000 HP

24 x 9 ft (7.3 x 2.7 m) Boliden Allis reconditioned SAG Mill with 3,000 HP (2240 kW) GE motor - Mill shell in 1 section - Inching drive, 3 piece - Feed and discharge ends - Shell and discharge liners - Discharge ...

Equivalent in Performance with Type AH Horizontal Slurry Pumps

- Centrifugal seal - Cast casings and pedestal base - Equivalent to series AH pump - Liners are pressure molded vulcanized rubber - Impellers are rubber, polyurethane and steel are available - Fabricated over-sea...

Type B-6-6 Ash Pump with 100 HP (74 kW) motor

Type B-6-6 Ash Pumps with 100 HP (74 kW) motor - Three units available.

16.5 x 340 ft Svedala Rotary Kiln

• Manufacturer: Svedala

- 16.5 ft diameter rotary kiln - 340 ft total shell length - 4 cast steel tires - 4 sets of rollers, 72x30 inch - Steel support frame - 3 access doors and 2 observation doors - Flanged exhaust outlet - Multi piec...