Used performance testing in Dublin, Ireland

Schaffner NSG 223

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG223 Interference Generator Plug‑In delivers high‑energy pulses to simulate destructive transients such as switching inductive loads or lightning surges. It can superpose symmetrical...

Teseq (Schaffner) NSG3060

• Manufacturer: Teseq - Schaffner

Details The Teseq NSG3060 Surge Generator is a modular, multifunction conducted immunity system designed for advanced EMC testing. With surge voltages up to 6.6 kV, a 7” intuitive touchscreen, and support for IEC...

Schaffner NSG 223A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 223A module is designed to generate high-energy pulses typical of those caused by switching inductive and capacitive loads or lightning strikes. It delivers pulses up to 2 Joules, availa...

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Teseq (Schaffner) NSG 5500

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-5500 is a modular pulse generator engineered for advanced automotive EMC testing. It supports a wide range of transient simulations including load dump pulses, with programmable am...

Schloder SESD230

Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Teseq (Schaffner) NSG437

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG437 ESD simulator delivers precise air and contact discharge testing up to 30 kV, ensuring compliance with IEC/EN 61000-4-2, ISO 10605, and other standards. Featuring a touch panel ...

Schaffner NSG3025

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG3025 Burst Generator offers a pulse amplitude range from 200V to 4.8kV ±10% (open circuit), with burst frequency adjustable between 0.1kHz and 1MHz ±2%. It supports 1 to 255 spikes per pa...

Schaffner NSG222A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG222A Pulse Interference Simulator delivers precision testing with 5ns/100ns pulse forms, featuring a built-in coupling network for symmetrical and asymmetrical pulse injection on mains co...

Rohde & Schwarz ESPI3

• Manufacturer: Rohde & Schwarz
• Model: ESPI

Details The Rohde & Schwarz ESPI3 is a 9kHz to 3GHz precompliance test receiver designed for EMI diagnostics across CISPR, EN, ETS, FCC, ANSI C63.4, VCCI, and VDE standards. It features five selectable detectors ...

Schaffner NSG2025-8

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-8 is a high-end 3-phase fast transient/burst generator capable of generating signals up to 8kV with a maximum burst frequency of 500kHz. It integrates a 30A coupling network and supp...

Schaffner NSG2025-4

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-4 is a high-end three-phase Fast Transient/Burst Generator, delivering up to 4.4kV pulse amplitude with a maximum burst frequency of 1MHz. It integrates a 30A coupling network and su...

Bendix King KTS-152

• Manufacturer: King

Details The Bendix King KTS-152 is a versatile avionics testing system designed for detailed troubleshooting of electronic assemblies. It supports both component and system-level diagnostics, ensuring engineers c...

Schaffner CDN 126

• Manufacturer: Teseq - Schaffner

Details The Schaffner CDN 126 coupling clamp is designed for precise interference pulse injection into signal and data lines, mains, and DC power supply cables. Built in compliance with IEC 1000-4-4 / 801-4, it i...