Used threading tools in Ohio, USA

SHIMAZU 3NF 3/8" TWO SPINDLE NUT TAPPER

• Manufacturer: SHIMAZU

M5 - M10 tapping range 8mm - 15mm min-max across flats 1400 -2100 RPM Equipped with Standard Hopper NOTE - Bulk loader in photos is not included

3/4" LANDIS SINGLE THREADER

• Manufacturer: Landis

SNOW NT-2 5/16'' SINGLE SPINDLE NUT TAPPER

• Manufacturer: Snow

SNOW NT-2 5/16'' SINGLE SPINDLE NUT TAPPER #6 to 5/16" Rated Capacity in Mild Steel 2" Tap Head Stroke 4000 Tapped Holes Per Hour 70-100 Lbs. Main Air line Pressure Equipped with Speedy Cut ST1-KU Head and Vibra...

DAVENPORT #10-901 SECONDARY OPERATION DRILLING AND TAPPING MACHINE

• Manufacturer: Davenport

THREE UNITS MOUNTED VERTICALLY TWO UNITS MOUNTED HORIZONTALLY ON EITHER SIDE OF INDEX TABLE. PNEUMATICALLY POWERED, HYDRAULICALLY CONTROLLED MECHANISM. EACH UNIT HAS A 3" STROKE. BRASS - ALUMINUM ..................

1-1/2" DOUBLE LANDIS PIPE AND NIPPLE THREADER

• Manufacturer: Landis

SNOW NT-2 5/16'' SINGLE SPINDLE NUT TAPPER

• Manufacturer: Snow

SNOW NT-2 5/16'' SINGLE SPINDLE NUT TAPPER #6 to 5/16" Rated Capacity in Mild Steel 2" Tap Head Stroke 4000 Tapped Holes Per Hour 70-100 Lbs. Main Air line Pressure Equipped with Speedy Cut ST1-KU Head and Vibra...

SACMA MODEL SP22 COLD HEADER

• Manufacturer: Sacma
• Model: SP-22

Sacma SP 22, 2 die 2 blow cold header Maximum diameter - 6 mm Maximum cutoff length - 110 mm Maximum length under head - 100 mm PPM - 170

SNOW NT-2 5/16" SINGLE SPINDLE NUT TAPPER

• Manufacturer: Snow

5/16" SNOW MODEL NT-2 SINGLE SPINDLE NUT TAPPER #6 TO 5/16" RATED CAPACITY IN MILD STEEL 2" TAP HEAD STROKE 4000 TAPPED HOLES PER HOUR 70-100 lBS. MAIN AIR LINE PRESSURE EQUIPPED WITH SPEEDY CUT st1-ku HEAD AN...

3" WAGNER THREADER, #WGL/30683

• Manufacturer: Wagner

O.A. DIM. - 121" X 46" X 58" WEIGHT - 5,465 LBS. EQUIPPED WITH: MOUNTED COOLANT LUBRICATION PUMP 559 VOLT 1150 RPM 5.5 AMP 3 PHASE MOTOR E

SHIMAZU M# SUPER 2 TWIN SPINDLE NUT TAPPER

• Manufacturer: Shimazu

Shimazu Model Super 2 Twin Spindle Nut Tapper, Serial No 2191, 1990 #10-1/4" Product Range ( Tap Size) 170, 190 Pieces per Minute 185mm x 25mm R Bent Tap Hopper AC Motor and Control Weight 1500 Lbs.

SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER

• Manufacturer: SHIMAZU

3/16"-3/8" Product Range ( Tap Size) 80-100 Pieces per Minute 250mm x 30mm R Bent Tap Hopper AC Motor and Controls Weight 1500 Lbs.