Used Weaving in Flanders, Belgium

2020 MAHR MILLIMAR C1200

• Manufacturer: Mahr

Film thickness measuring gauge MAHR type MILLIMAR C1200 display (Resolution 0.1mm) + gauge MAHR type 820 NC/FC serial number 19080086, year of construction 2020, not used item.

2009 PICANOL OMNIplus800-4-J-190

• Manufacturer: Picanol

PICANOL air jet weaving loom type OMNIplus800-4-J-190 year of construction 2009, serial number 298132, working width 1900mm, 4 colours installed, with jacquard STAUBLI type SX2688 year of construction 2010 serial...

2005 PICANOL OMNIplus800-4-J-190

• Manufacturer: Picanol

PICANOL air jet weaving looms type OMNIplus800-4-J-190, 1 x year 2005 / 18 x year 2006 / 1 x year 2007, working width 1900mm, 4 colours installed, equipped for jacquard but without jacquard. Equipment: SUMO, ELO,...

2007 PICANOL OmniPlus800-F-4-P-340

• Manufacturer: Picanol

PICANOL air jet weaving loom type OmniPlus800-F-4-P-340 year of construction 06/2007, serial number 290267, working width 3400mm, 4 colours, with jacquard STAUBLI type LXL year of construction 06/2019, serial num...

2014 DORNIER AWS-4/S-D-350

• Manufacturer: Dornier

DORNIER Air jet weaving looms type AWS-4/S-D-350 year of construction 2014, serial numbers 80889 / 80890 / 80891 / 80893, working width 3500mm, 4 weft colours (servo controlled), Electronic STAUBLI dobby type S30...

2001 NEUENHAUSER

• Manufacturer: Neuenhauser

Set of 4 overhead blowers NEUENHAUSER year of construction 2001, conformity CE, details : 2 x OUTSIDE NEUENHAUSER to blow and vacuuming dust from jacquard looms, total length 41m, 1 x INSIDE rail with NEUENHAUSER...

2018 MAYER-KARL FILSIZE-S-F-1800

• Manufacturer: Karl Mayer

Single-end sizing unit KARL MAYER rotal type FILSIZE-S-F-1800 Year of construction 2018, working width 1800mm, single warp beam unroll device (The beam is driven by a motor and the tension is continuously control...

17J203

Complete set of tucking-in device for Picanol rapier GTM, GTX, …Right, Middle and Left Side + supports + templets.

2003 GENKINGER EE-GYR 20/10

• Manufacturer: Genkinger

Electrical beam transporter GENKINGER type EE-GYR 20/10, serial number 203.0439 year of construction 2003, for changing ground and terry warp beams Ø flanges up to 1200mm in weaving mill. Electrical side correcti...

2012 PICANOL OptiMax-4-R-540

• Manufacturer: Picanol

PICANOL rapier loom type OptiMax-4-R-540 year of construction 2012, serial number 312716, working width 5400mm, 4 colours, electronic dobby STAUBLI type 2622B 12 levers installed, Controlled positive rapier GPG, ...

1999 DORNIER HTVM/E-200

• Manufacturer: Dornier

DORNIER Tire-cord rapier loom type HTVM/E-200 serial number 41654 year of construction 1999, nominal working width 2000mm, with electronic STAUBLI dobby type 2861/2 year of construction 2004, 16 levers installed....

1997 DORNIER HTVS8/J-190

• Manufacturer: Dornier

DORNIER rapier loom type HTVS8/J-190 year of construction 1997, serial number 38859, nominal working width 1900mm, equipped for jacquard but without jacquard. Details : 8 weft colors, 8 weft feeders LGL Smart Vec...

USTER-ZELLWEGER DELTA

• Manufacturer: Uster

Drawing in machine USTER DELTA - 28 frames - 2400 mm working width - C type heddles - fancy beam option Type/Serie-Nr.:5100.222/14+Drawing cart 1 Type/Serie-Nr.:G/5155.2339-Drawing cart 2 Type/Serie-Nr.:G/5155.2338

1996 VAMATEX P1001ES T190

• Manufacturer: Vamatex

VAMATEX rapier loom type P1001ES T190 year of construction 1996, serial number 26804, working width 1900mm, 8 colours, foreseen for Jacquard but without jacquard Equipment : small grippers on hook guiding system,...

2003 ALEX T134-D-PF-P

• Manufacturer: ALEX

Inspection unit ALEX type T134-D-PF-P year of construction 2003, serial number T1603 - details : enlightened inspection table & roll unit for woven fabrics until 320cm width, 400V, 7kW, 5 bar; dimensions complete...