Used Transformers in Beijing, China

J2100A Injection Isolation Transformer

• Manufacturer: 其它品牌

Introduction: Many people mistakenly believe that the injection transformer is a non-critical component and its bandwidth is not important because the transformer is outside the measurement range. This is far fro...

J2101A Injection Isolation Transformer

• Manufacturer: 其它品牌

Introduction: Injection transformers are special transformers connected between the network analyzer and the DC/DC converter or voltage regulator, used to inject disturbance signals into the control loop, mainly ...

DTR8510 Transformer Turns Ratio Tester

• Manufacturer: 法国/CA

Introduction: Warning display of faults such as wrong wire connection, polarity reversal, open circuit and short circuit, the instrument is easy to connect and easy to set up; no calibration or balancing required...

2MHz bandwidth injection transformer UT-ISOT

• Manufacturer: 优利德

Introduction: UT-ISOT broadband injection transformer injects signals into circuits, such as switching power supplies and control loops, and cooperates with loop analyzers to realize loop analysis of switching po...

Efficient and Reliable Unattended Substation System | Factory Direct Pricing

Unattended Substation System - A reliable factory-produced solution for efficient management and operation of electrical substations. Enhance productivity with our innovative technology.

GF106FY Current transformer & voltage transformer burden box

The GF106FY-1 Current transformer burden box is applicable to current transformer accuracy testing bench as secondary load of test object CT, its series connection to the secondary winding of test object CT.

25va-5000va distribution transformers

• Manufacturer: EIE

25va-5000va distribution transformers Key feature: 1.Good performance at work. 2.Low energy consumption 3.small size 4.Wiring safety 5.Wide use Other series SG series three phase SVC Series Industrial-grade autom...

GF1060 Laboratory Current Transformer Test System

The GF1060 current transformer test system is suitable for the calibration of traditional electromagnetic current transformers and electronic current transformers with small voltage output. The GF1060 current tra...

Gf1060M Miniature Current Transformer Test Equipment

The GF1060M miniature current transformer test equipment is developed by GFUVE GROUP, which integrates a high precision 0.

T-218 Automatic Portable Transformer Demagnetization Tester

The T-218 is a fully automatic transformer demagnetization tester which performs three-phase transformer and single-phase and three-phase power transformers demagnetization. Transformer magnetic core demagnetizat...

LC-2KV Automatic Transformer Oil Tan Delta Tester

• Manufacturer: Delta

The LC-2KV automatic transformer oil tan delta tester designed and manufactured according to GB/ T5654-2007 "measurement of relative capacitance, tan delta and dc resistivity of liquid insulation materials". delt...

S150 Large Jaw Cable Fault Location Supermalloy Current Transformer Clamp

The S150 ct clamp is a high performance AC Clamp on current transformer probe with excellent transformation and low phase shift. The high quality magnetic supermalloy core and uniform windings provide for accurat...

JLSZV-35W 3P4W IEC combined current transformer and potential transformer

• Manufacturer: Combi

GFUVE electronics manufactures an extensive line of cast epoxy resin insulated current transformers and potential transformers across the voltage range of 5.5KV to 72.5kV.

S(F)SZ10 Power Transformer

is one of the low-loss series transformers. S (F) SZ10 power transformer is a dual-winding, three-phase ventilation transformer. The low voltage side adopts the angle connection, and the high voltage side adopts ...

S(F)SZ11 Power Transformer

Daelim’s S(F)SZ11 Power Transformer series of three-phase low-loss power transformers are self-developed and cost-effective high-reliability transformers. Daelim has made substantial improvements and innovations ...