Used Material Handling in Community of Madrid, Spain

"GLATT LABORTECNIC" STAINLESS STEEL CABIN FOR AIR CLEANING OF PALLETS

• Manufacturer: Glatt

"GLATT LABORTECNIC" STAINLESS STEEL CABIN FOR AIR CLEANING OF PALLETS WITH TWO OPPOSITE OPENING DOORS FOR PASSING THE PALLETS FROM THE SECONDARY ZONE TO THE PRIMARY ZONE. THIS CABIN USES "HEPA" FILTERS "AS IS" S...

Internal Transport Trolleys (5x)

- 4 x trolleys: total dimensions 3000 x 700 x 2150 mm each, 2 load levels of usable dimensions approx. 2700 x 700 x 850 mm at the top and 2600 x 700 x 950 mm at the bottom, 6 swivel castors - Operating conditions...

Internal Transport Trolleys (4x)

- 4 x trolleys: overall dimensions 3000 x 700 x 2150 mm each, 2 load levels of usable dimensions approx. 2750 x 700 x 750 mm at the top and 2600 x 700 x 1100 mm at the bottom, 6 swivel castors - Operating conditi...

Internal Transport Trolleys (3x)

- 3 x trolleys: overall dimensions 3000 x 700 x 2150 mm each, usable dimensions approx. 2500 x 700 x 1800 mm, 6 swivel castors - Operating conditions: unchecked. - Dimensions for transport approx. 3000 x 2100 x 2...

Handling Equipment

C-Hook / Coil-Car / Electromagnets / Transport cars for tubes

50 LITRE APPROX. TANK WITH HANDLE

ALHER T2CR RACK AND PINION MATERIAL HOIST

• Manufacturer: Encomat

ALHER brand rack-and-pinion forklift for sale, 1300/1500 kg, with 12 1.5 m masts. Possibility of selling fully painted and serviced for an additional fee. +34 91 715 15 25 VAT not included - Load capacity: 1300/...

Nissan forklift truck

• Manufacturer: Nissan
• Model: GN01L18U

Nominal capacity 1750 kg, maximum load height 4500 mm, with lateral displacement, Ns. GN01E701396.

Radwag SAL/C

• Manufacturer: Radwag

The Radwag SAL/C anti-vibration table for laboratory balances is designed to offer maximum stability for mass measurements. Dimensions: 770 x 650 x 815 mm (±10 mm). 115 mm thick granite stabilizing plate. Maximum...

400 LITRE APPROX. STAINLESS STEEL BINS WITH TOP LID

400 LITRE APPROX. STAINLESS STEEL BINS WITH TOP LID WITH CLAMP CLOSURE AND OUTLET WITH VALVE. THESE BINS ARE STACKABLE AND ARE PREPARAED FOR THEIR USE WITH MIXERS IF NECESSARY DIMENSIONS: 920mm(WIDTH) X 1.250mm(...

STAINLESS STEEL 400 LITRE APPROX. TANKS WITH VALVE AND WHEELS

550 LITRE APPROX. PVC STORAGE AND TRANSPORT STACKABLE TANKS WITH OUTLET VALVE

"SKE" 1.100 LITRE APPROX. STAINLESS STEEL STORAGE AND TRANSPORT STACKABLE TANKS - BINS WITH OUTLET VALVE

500 LITRE APPROX. TANK

1350 LITRE APPROX. TANK WITH JACKET