- Trusted Seller

TSCHUDIN TS 45 A
- Manufacturer: Tschudin
Control: SIEMENS SINUMERIK 840 D | Centre height: 100 mm | Distance between centres: 430 mm | Max. grinding diameter: 198 mm | Grinding length: 400 mm | Max. work piece diameter: 198 mm | Min. work-piece diamete...
Brügg, Switzerland - Trusted Seller

2002 TSCHUDIN PL 105 A
- Manufacturer: Tschudin
Control: GE FANUC Series 18-T | Centre height: 175 mm | Distance between centres: 1000 mm | Max. grinding diameter: 348 mm | Grinding length: 1000 mm | Workpiece weight on centres max.: 250 kg | Diameter: 500 mm...
Brügg, Switzerland - Trusted Seller

SOLID RBS4 / 13
- Manufacturer: Solid
Number of drill-heads: 4 | Table length: 1250 mm | Table width: 400 mm | Number of t-channels: 1 | T-channel width: 14 mm | Number (steps): 12 | Stepless: 200 | From: 3200 t/min | Voltage 50 hz 3x: 380 Volt | Ma...
Brügg, Switzerland - Trusted Seller

KUGEL MULLER MPS 2
- Manufacturer: Kugel Muller
- Model: MPS 2
Throwing wheel diameter: 175 mm | Circulary table diameter: 300 mm | Grinding height over table: 245 mm | Grinding spindle speeds: 2560 t/min | Voltage 50 hz 3x: 380 Volt | Machine's weight about: 200 kg | Lengt...
Brügg, Switzerland - Trusted Seller

GMN GEORG MÜLLER MPS 2-R 300
- Manufacturer: Muller
Diameter: 175 mm | Width: 900 mm | Bore: 76 mm | Circulary table diameter: 300 mm | Travel of the fine feed: 12 mm | Grinding height over table: 240 mm | Magnetic chuck: 95 mm | From: t/min | Up to: 30 t/min | G...
Brügg, Switzerland - Trusted Seller

2011 PARAGON RIG-150NC
- Manufacturer: PARAGON
Control: HITECH | Min. grinding diameter: 6 mm | Max. grinding diameter: 150 mm | Max. grinding depth: 150 mm | Above the workpiece table: 520 mm | Longitudinal travel (z-axis): 540 mm | Rapid traverse z: 9 m/mi...
Brügg, Switzerland - Trusted Seller

DISKUS DD 300 So
- Manufacturer: Diskus
Max. work-piece height: 80 mm | Number of grinding heads: 2 | Outside diameter: 300 mm | Inside diameter: 233 mm | Width / height: 50 mm | From: 1530 t/min | Up to: 24 m/s | Driving plate: 29.6 - 192 mm/s | Volt...
Brügg, Switzerland - Trusted Seller

DISKUS DD 400 II CRM
- Manufacturer: Diskus
Max. work-piece height: 80 mm | Grinding width: 40 mm | Outside diameter: 400 mm | Inside diameter: 250 mm | Width / height: 50 mm | From: 135 t/min | Up to: 1435 t/min | Peripheral speed: 3 - 30 m/s | Rotation ...
Brügg, Switzerland - Trusted Seller

Single Unwinder
- Manufacturer: Single Unwinder
Single Unwinder With photocell for paper reading Hydraulic lifting of the paper roll Air-mechanical brake, Re CX250 Paper tension control through dancer roller and brake Immediately available About Single Unwinde...
Lugano, Switzerland - Trusted Seller

Single Unwinder,
Single Unwinder, years '90 Single Unwinder. It was installed in a Manzoni flat&satchel bag machine Ideal for paper Immediately available About Single Unwinder, years '90 Location Information Available in region: ...
Lugano, Switzerland - Trusted Seller

BLUM TC 50
- Manufacturer: Blum
Brügg, Switzerland - Trusted Seller

DUNKES DG 05
- Manufacturer: Dunkes
Pressure: 1000 (12 Atü) kg | Length: 400 mm | Width: 150 mm | Max. distance from table to slide: 110 mm | Depth of throat: 65 mm | Machine's weight about: 20 kg | Height: 600 mm
Brügg, Switzerland - Trusted Seller

BLUM TC 50
- Manufacturer: Blum
Brügg, Switzerland - Trusted Seller

2000 JOSSI DLP 450 HV / 80E-ZH
- Manufacturer: JOSSI
Pressure: 5 kN | Length: 400 mm | Width: 250 mm | Depth of throat: 100 mm | Height: 730 mm
Brügg, Switzerland - Trusted Seller

BLUM TC 50
- Manufacturer: Blum
Brügg, Switzerland 
Mori Seiki NH-4000 DCG Machining Center
- Manufacturer: Mori Seiki
- Model: NH-4000 DCG
Good condition Mori Seiki NH-4000 DCG Machining Centers available between 2004 and 2016 years. Located in Germany and other countries. Click request price for more information.
Germany

