Used Machine Tools in Saitama, Japan

Murakoshi MY-200XN
- Manufacturer: Murakoshi
With φ780 lower bag. Disposable plastic bag for easy dust disposal is available as an option. Inverter for air volume control and Fan-shaped filter to eliminate clogging Branch pipe for separating the air intake ...
$3,135 USD
Kumagaya, Japan
2016 Uryu Production NR-605309
- Manufacturer: Uryu
Product name: Other | Main specifications: H1900419 Valve Cover Tightening Machine Rated voltage: AC 200V, 60Hz Rated capacity: 3.0 KVA , 15A
$640 USD
Tokigawa, Japan
Dainippon Sumitomo DGM-400S
- Manufacturer: Dainippon Screen
Designed so that the thickest material of up to 250 mm and the thinner of the assembly always get the same consistent condition! Simultaneous processing is possible even with materials of different thicknesses!
Kumagaya, Japan
Murakoshi MY-100XN
- Manufacturer: Murakoshi
It is a drawer specification combined with a filter for fine powder with 3 horsepower.
Kumagaya, Japan
Murakoshi MY-75X
- Manufacturer: Murakoshi
Equipped with a highly energy-efficient inverter. Air volume can be adjusted. Plastic bags are secured with a one-touch ring. Easily removable by pulling the ribbon. φ100 duct hose Hose band Round hood Various op...
$1,275 USD
Kumagaya, Japan
Muracosi MYG-75
- Manufacturer: Muracosi
Built-in inverter with high energy saving effect. Air volume adjustment is possible. There may be changes to the inverter. Dust outlet. Since dust collects at the entrance It can be easily taken out with the atta...
Kumagaya, Japan
Asahi Seiki Scroller 1500
- Manufacturer: Seiki
この機械についてお問い合わせは下記の内容をご入力の上、【送信】ボタンをクリックしてください。」の付いているものは必須項目ですので、ご記入漏れの無いようお願い致します。フトコロ（奥行）１５００ｍｍ切削能力（最大）６０ｍｍストローク（上下）３０ｍｍテーブル寸法６００ｍｍ×１０００ｍｍ１００Ｖ３００Ｗ
Kawaguchi, Japan
Laxo LE400
- Manufacturer: Laxo
Product name: Contour machine | Main specifications: Cutting capacity: Height 300 Depth 395 Cutting stroke: 330 Table dimensions: 600x600
Tokigawa, Japan
2015 Accors Flywheel Spin Tester
- Manufacturer: ACORDS
Flywheel spin tester φ450 Product name: testing machine | Main specifications: Flywheel spin tester φ450
Tokigawa, Japan
Kanefusa with hole for molders
- Manufacturer: Kanefusa
Kanefusa has developed a knife holder mechanism that automatically sets the blade by centrifugal force. The knife holder mechanism developed by Kanefusa allows the blade to be set automatically by centrifugal for...
Kumagaya, Japan
Kanefusa super-finishing plane blade
- Manufacturer: Kanefusa
It has excellent performance in both soft and hard materials. It also Smooth and beautiful cutting surfaces can be obtained. and good sharpness of cut and light work is possible due to low resistance. Various siz...
Kumagaya, Japan
Kanefusa Finishing bits, double-pressed type
- Manufacturer: Kanefusa
Bits for finishing in light cutting. The double-pressed type is effective in suppressing burrs on the top and bottom surfaces. Shaft diameter: φ12/φ16 Blade diameter: φ12/φ16 Overall length: 105/110mm Blade lengt...
Kumagaya, Japan
Kanefusa, alternate blade type, super-finishing plane blade (for stationary type)
- Manufacturer: Kanefusa
No re-sharpening is required due to the replaceable blade type. The replacement blade has a The back blade is equipped with a back blade function. The back blade can be cut without adjustment. The holder has a bu...
Kumagaya, Japan
Kanefusa Jointer Knife
- Manufacturer: Kanefusa
No re-sharpening is required due to the replaceable blade type. The replacement blade has a The back blade is equipped with a back blade function. The back blade can be cut without adjustment. The holder has a bu...
Kumagaya, Japan
Kanefusa Dia Cosmobit Eco.
- Manufacturer: Kanefusa
Both forward and reverse leaded cutting edges prevent burrs and chips on both surfaces of the work material. In addition The use of high quality diamond tips The diamond inserts are of high quality and provide ou...
Kumagaya, Japan