Used Industrial Furnaces & Ovens in Poland

WEN 108 air and smoke furnace fan

Inlet 70 x 100 cm Outlet 70 cm Motor 22 kW

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Gas furnace (natural gas) 4 MW

TYPE LLR 4000 4 MW furnace Year 1999 Maximum flow temperature 120°C, maximum pressure 6 bar Used very little, only for cleaning the two adjacent biomass furnaces The furnace is in very good condition, as shown in...

Ash conveyor, waste removal from the Ż 34 furnace

Length: 4.50 m Screw diameter: 180 mm Outer diameter: 210 mm Motor with geared motor: 1.1 kW

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Ash conveyor, waste removal from the Ż 35 furnace

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Emergency cooler for 3.5 MW furnace

A total of 8 fans, with high-performance radiators underneath. Two segments, one segment will cool 1750 kW.

Heating furnaces for plastics

• Manufacturer: Tools Factory

The device consists of a heating oven with single-sided heating from the top . The heaters have the ability to adjust each radiator individually from a touch panel. The device has a built-in PLC that controls the...

Urbas biomass furnace, rated power 5 MW, typed at 3.5 MW

Year 2002 Water temperature: 110 degrees Celsius, pressure: 6 bar Power: 5.0 MW, rated at 3.5 MW due to regulations and the lack of an electrostatic precipitator Delivery: late April – May 2026

Continuous furnace

Pass-through oven (adjustable blowing height, blowing force, belt speed, belt tensioner, two sections, complete set, including fans on chimneys, stainless steel chimneys, possibility of connecting steam, everythi...

Froling 200 KW biomass stove – new lining

Furnace with a heating capacity of 200 kW TYPE Lambdamat FWT 200 Year 1996 Fueled by biomass, bark, wood chips, and sawdust. New lining!!!

2001 Gas forced circulation hardening furnace

• Manufacturer: FAIRBANK BREARLEY

Chamber furnaces are designed for heat treatment of materials (mainly heat improvement of steel: hardening and tempering). Thanks to their robust construction, high reliability and a wide range of sizes and acces...

Central coal furnace for coal and wood 4000 m3

The furnace has a special internal construction, consisting of 31 flame pipes, through which hot gases pass through, heating pipes with a diameter of 70 mm. The turbine draws in cold air that spins between hot pi...

Thermo oil batch furnaces

• Manufacturer: Ibis

The heavy-duty thermo-oil ovens are ideal for artisan, large and industrial bakeries. They are dedicated to bakers who require the highest quality of baked goods. Production technology and top-quality materials e...

Trolley thermo oil furnaces

• Manufacturer: Ibis

The heavy-duty thermo-oil ovens are ideal for artisan, large and industrial bakeries. They are dedicated to bakers who require the highest quality of baked goods. Production technology and top-quality materials e...