- Trusted Seller
Norden Tube Plastic 602
- Manufacturer: Norden
Norden, Model 602, Automatic, hot air, plastic or laminate tube filler and sealer. Rated from 10 to 60 tubes per minute – depending on materials and application. Tube size range: 10mm to 50mm in Diameter; 50 mm t...
Carol Stream, IL - Trusted Seller
Unipac Tube Plastic SILVER 80
- Manufacturer: Unipac
- Model: SILVER 80
Unipac, Model Silver 80, automatic, plastic or laminate tube filler and sealer. Rated from 10 to 40 tubes per minute – depending on materials, application and machine configuration. Tube size range: 10mm to 50mm ...
Carol Stream, IL - Trusted Seller
Norden Tube Plastic 400
- Manufacturer: Norden
Norden, Model NM400HA, Automatic, hot air, plastic or laminate tube filler. Tube size range: 3/8" to 2" in Diameter; 2" to 10" in Height. Fill range: 1oz to 10oz. Equipped with cassette style magazine, tube depre...
Carol Stream, IL - Trusted Seller
Unipac Tube Plastic SILVER 100
- Manufacturer: Unipac
Unipac, Model Silver 100, automatic, hot air, plastic or laminate tube filler and sealer. Rated from 10 to 40 tubes per minute – depending on materials, application and machine configuration. Tube size range: 10m...
Carol Stream, IL 
Mitchell and Sons Storall Feeder
- Manufacturer: MitchelMitchel
53776001 Used Mitchell and Sons Storall Feeder, 10 cubic meters; 9' diameter. Serial# S88105. Previously used in a phosphate briquetting plant. Our freight specialists can assist you with door to door transportat...
Belvidere, IL
Hosokawa Mikro Pulverizer Model 4SCB – Carbon Steel, 60 HP, Food Application
- Manufacturer: Hosokawa
53264039 Used Hosokawa Mikro Pulverizer Model 4SCB Carbon Steel, 60 HP, Food Application. 20" diameter x 12" wide rotor with 4 rows swinging stirrup hammers. 8" inlet. Driven by a 60 hp, 3/60/550 volt, 1775 rpm...
Belvidere, IL- Trusted Seller
AB PROCESS 200 GALLON HOLDING TANK
- Manufacturer: AB PROCESS
AB PROCESS 200 GALLON HOLDING TANK 50 PSI @100 DEGREES F SN 91258301 BUILT IN 2000
Decatur, IL 
Turbo Mill Model CMTM-1500 – 200 HP, Clam-Shell Design, Blower, Cyclone, Airlock, VFD Controls (
- Manufacturer: Cable Management
52791017 Turbo Mill Model CMTM-1500 200 HP, Clam-Shell Design, Blower, Cyclone, Airlock, VFD Controls (Used). The CMTM-1500 turbo mill is designed to grind rigid and semi-rigid materials into a fine particle siz...
Belvidere, IL
Fitzpatrick Chilsonator – Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50–100 kg/hr Capacity
- Manufacturer: Fitzpatrick
- Model: 4L X 10D
49227002 Used Fitzpatrick Chilsonator Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50100 kg/hr Capacity. Dependent on density of product and roll pressure and screw speed is 50 to 100 kg/hr. (110 to 220 lbs./...
Belvidere, IL
Munson Machinery Attrition Mill – Model SK-24-SS
- Manufacturer: Munson MachineryMunson Machinery
54139001 Used Munson Machinery Attrition Mill, Model SK-24-SS. 304 Stainless Steel construction. 6" diameter gravity fed inlet, with 3" diameter air inlet control with gate. 6" bottom outlet. Approximately 26" di...
Belvidere, IL
IQF Freezer System with Century Refrigeration Unit and Shaker/Sifter Setup
- Manufacturer: IQFIQF
53911001 Used IQF Freezer System, Consisting of: (1) Century Refrigeration Freezer Model NSB15M7; SN #06-18-131458-001-001; 4" x 32" opeing at each end; (2) 1HP fan motors; R-507 refrigerant; -25 degrees F evap t...
Belvidere, IL
High-Capacity Solvent Reclaimer for Sale – IST Rotoplus 400, 190°C Max Temp
- Manufacturer: IST
53487001 Used IST Solvent Reclaimer, Model Rotoplus 400. 400L loading capacity; 400 to 2000 liter/24 hour productivity rate. 190 degree C (374 F) maximum working temperature. 3/60/480V. Previously used for solven...
Belvidere, IL
Thermatool Tube Cutting Machine - 2”-4.5” OD, ABB Drives, Scrap Conveyors
- Manufacturer: ABB
51610001 Used Thermatool Tube Cut-Off Machine. OD Range: 2"-4.5", Max Wall Diameter: .235". Max Speed 250 FPM, Hydraulic Accelerator Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors Unico Controller, ABB...
Belvidere, IL
Buy 6" PFA Jacketed Column – Heat Transfer & Corrosion Protection
- Manufacturer: UnknownUnknown
50467009 Used 6" PFA lined column, jacketed. Dia (in): 6
$1,500 USDBelvidere, IL
6" PFA Jacketed Lined Column – Corrosion-Resistant, Industrial-Grade
- Manufacturer: UnknownUnknown
50467008 Used 6" PFA Jacketed Lined Column.
$1,500 USDBelvidere, IL
Clamco 4T Shrink Wrapping Machine
- Manufacturer: Clamco
- Model: 4T
Good condition Clamco 4T Shrink Wrapping Machines. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword