Used in Styria, Austria

2017 NC - SW 6

• Manufacturer: NC
• HP: 73.755 horsepower
• Load capacity: 6,000 kilogram

Operating hours: 1690 hours | Mass: 4665 kg | Power: 55 kW | Payload: 6,000 kg | Passage width: 2,300 mm

2019 Huppi - 72

• Manufacturer: Huppi

System Geel SW010 / Martin MH03 Mass: 100 kg | Carrier device: 1.6-2t excavator | Working pressure: 70-140 bar | Oil flow: 20-30 l/min

2016 Barbaric - B8 GA 4 500 - Battery-powered vacuum lifting device

• Manufacturer: Barbaric

with suction cup, mounting crossbar, load capacity 1000 kg with vertical lift

KTM - SX 50 Pro

• Manufacturer: KTM

2018 Huppi - 302

• Manufacturer: Huppi

System Geel SW020 / Martin MH10 Mass: 350 kg | Carrier device: 4.5-6t excavator | Working pressure: 80-150 bar | Oil flow: 30-60 l/min

2020 Menzi-Muck - 160 cm trench cleaning bucket

• Manufacturer: Menzi-Muck

System Geel SW035 / Martin MH18 Mass: 427 kg | Carrier device: 10-16t excavator | Content: 505 l

2019 Atlas Copco HILIGHT H5+

• Manufacturer: Atlas-Copco
• Model: HILIGHT H5+
• Hours: 250 hour

Vertical hydraulic mast with 4 x 350 W LEDs, max. height 8 m, max. wind speed 80 km/h, average illumination area 5000 m², rated frequency 50 Hz, rated voltage 230 V, rated motor power 3.5 kW, motor speed 1,500 rp...

2024 Westtech - Wood grab WG 1270

• Manufacturer: Westtech

Optionally available with rotator and mounting plate!

2015 Takeuchi TB295W

• Manufacturer: Takeuchi
• Model: TB295W
• HP: 103.25699999999999 horsepower
• Hours: 7,990 hour

with power tilt, 2 buckets, 1 trench cleaning bucket

2016 SBM Remax

• Manufacturer: SBM
• Model: Remax
• HP: 292.33799999999997 horsepower
• Hours: 10,060 hour

Impact crusher with screening unit with 6m³ bunker attachment, finger screen elements, conveyor belt 500x 2.1m, overband magnet, spray system, return belt with screen box, screen combination system 0.8 0.16 0.32 ...

2016 LSB - 1000-02

• Manufacturer: Unknown

Screening bucket, system Geel SW020 / Martin MH10, material is separated into 3 grain sizes

2024 Sweeper Type 600

• Manufacturer: Unknown

Width from 185 cm - 280 cm The following options are available: - Three-point linkage Cat. II, forklift attachment, Euronorm with pendulum compensation, wheel loader attachment with pendulum compensation - Front ...

Used rammer - pulverizer

• Manufacturer: Rammer

Carrier device: 30-40t excavator

1997 XTRA-VATOR - rear excavator attachment

• Manufacturer: Unknown

Year estimated Mass: 3000 kg

Big bale grab with JCB Q-Fit

• Manufacturer: JCB

Mass: 220 kg | Load capacity: 1,100 kg | Opening width: 1,600 mm