Used exchangers in Utrecht, Netherlands

Plate heat exchanger

Plate heat exchanger, not sanitary. 1 section with 19 plates. 4 in-/outlets of 22 mm. Total dimensions 40 x 25 x 50 cm.

Insulated Tube Heat Exchanger

Insulated tube heat exchanger, Monotube, 13tubes of 6mtr long, surface ±: 4.9m2 total surface, dimensions total unit 6,200 mm x 400 mm x 1,300 mm, 6bar, 150°C max,

Ritter Tubular heat exchanger

• Manufacturer: Ritter

Total Dimensions: L 323cm x H 40cm x L 323cm, Product chamber: operating pressure +6 bar, 60Liter, + 180 ° C, Jacket Chamber, 33L, + 90 ° C, operating pressure +6 Bar.

TSA Tubular heat exchanger

Tubular heatex changer. 52 tubes -Length tubes: 130 cm -Diameter tubes Ø 20 mm. '' Conn "Steam DN50- Product 2x DN65.

1989 Wilhelm Deller heat exchanger

• Manufacturer: Wilhelm Deller KG

Hotwater prepartion unit, volume 1175 ltr, 80 ° C, pressure 5 bar. Jacket volume 13.5 ltr, 175 ° C, pressure 8 bar.

Het Stempel BV Tube heat exchanger

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE) and static mixer to have optiomal heat exchanging. Monotube, 1 compartment, Straight design with swirls, 4 tubes, 1 section, Length: 2 mtr, outer diameter 38 mm, inner diam...

1993 Alfa Laval plate heat exchanger

• Manufacturer: Alfa-Laval

Alfa Laval plate heat exchanger. 1 section - 50 plates - max 30 bar - Capacity 6.00/ 6.25.

2002 Sacome 1x1-TFMI-370-1-6''/19.05-6000-316L/2205-HARD

• Manufacturer: Sacome

Multitube Tubular Heat Exchanger. 37 tubes in 1 tube. Length 6 meters. Product side: 100 °C - 16.0 bar - 43.25 liters - Margarine - Connection: 3'' ISS. Media side: 100 °C - 10,0 bar - 34,98 ltr - Water - Connect...

1993 APV K 55

• Manufacturer: APV - Gaulin
• Model: K 55

Plate heat exchanger, sanitary (PHE). Pressure: 10 bar, Beam length: 147,5 cm, Connections: 4x4" DIN. Currenct configuration: 1 Section: 105 plates - Connections head: 2 down, follower 2 down. Dimensions: 130x80x...

1993 Alfa Laval CLIP 8-RM

• Manufacturer: Alfa-Laval
• Model: CLIP 8-RM

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar. Beam length: 180 cm. Connections: 2x 2" Din and 10x 3" SMS. Current configuration: 4 Sections: 17-18-18-24 plates, in total 77 plates. Connections head: 2...

2003 Schmidt Sigma 37 TBV

• Manufacturer: Schmidt
• Model: Sigma 37

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar. Beam length: 150cm, connections: 9x 3" SMS. Current configuration: 3 Sections: 22-91-22 plates (total 135 plates). Connections head: 2 up, follower 2 up. ...

1989 Crepaco 1HRT-672

• Manufacturer: Crepaco

Scraped surface heat exchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (1...

Tetra Pak Spiraflow

• Manufacturer: Tetra Pak
• Model: SPIRAFLOW

Double jacketed and insulated tubular tube heat exchanger. Set of 5 tubes. Multitube, scheme: 2 x 2 in parallel and 1 in serial. Effective length 6mtr. 4 Tubes outer diameter 105 mm and 1 outer diameter 115 mm. 4...

1995 Alfa Laval Clip 10

• Manufacturer: Alfa-Laval
• Model: CLIP 10

Milk thermiser/pasteuriser for Full fatt milk, full automatic. Exisiting out of: Centrifugal pump feed pump to the pasteuriser, inlet filter, Balance tank with 3 level sensors, spraybowl for cip, 3 level sensor. ...

Alfa Laval Contherm 6x9"

• Manufacturer: Alfa-Laval
• Model: CONTHERM 6X9

1x Scraped surface heat exchanger, dismanteled, excluding hydroset elevator construction, drive motor or frame. including Rotor and plastic scraper blades, cast product heads and Nickel plated cylinder. (Suitable...