Used Processing in Hiroshima, Japan

Multitubular heat exchanger

Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One

1998 [Daiko Kakoki] Conical Dryer 1000L

• Manufacturer: Daiko Kako Kako Kikai

Can body 1200φ×1837 Design pressure: FV vacuum inside can ~3Kg / Jacket 3kg

Dalton DV-1-100

• Manufacturer: Dalton

Total capacity: 220L with butterfly valve Power: 0.75KW | Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: 1 unit

2000 Kohken Powtech FS-J01-S

• Manufacturer: Kohken Powtech Co.

Capacity: 20Kg/h max. ⇓Test run video⇓. Power: 0.4Kw200V | Quantity saved: 1

2007 Buhler SDV 1100

• Manufacturer: Bühler

Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...

2006 uzax 1050l

• Manufacturer: yooxax

Material: SS | Quantity saved: One

2006 Veolia CMF12

• Manufacturer: Suez WTS / Veolia

PP hollow fiber membrane module (1.5m2 x 12 modules) ＜Basic design Leachate (after pretreatment, PH 6-9, water temperature 2-35°C, turbidity ava < 30°C) in continuous operation for 24 hours (backwash interval 60 ...

1999 Mitsubishi Kakoki SJ-50F

• Manufacturer: Mitsubishi Kako Corporation

6500 rpm, 5520 L/h, explosion-proof specification Previous experience: refining fuel oil (C fuel oil) We only have enough for one set of disassembling tools, so the remaining two units will be purchased or manufa...

Magellan PT-60

• Manufacturer: Mazellar

混合量：60L 備考 カタログ Power: 0.2kw | Material: Main section SUS | Quantity saved: One

1979 Izumi Food Machinery Cylinder Vertical

• Manufacturer: Izumi

Jacket / stirrer (0.75 kw, two stirring blades) Closed type, with shower ball / manhole

1984 Iwai machine cylinder vertical type

• Manufacturer: Iwai Machinery

Jacket / stirrer (2.2 kW, 3 propeller blades) ※ Satake Multi Mixer (360 rpm) Closed type, with shower ball / manhole

1996 HAKKO INDUSTRIES (now GL HAKKO) 6000L

• Manufacturer: Hakko

Explosion-proof, cyclo reducer (reduction ratio 1/15). Shaft seal: mechanical seal. Maximum pressure of main unit: FV to 0.18 MPa / Jacket: 0.54 MPa. Design temperature: [Body] -20 to 170°C / [Jacket] -20 to 200°C.

Mutual Sangyo RM-1000

• Manufacturer: mutual industry

Capacity: 660L Gear ratio: 1/30 Lower discharge (slide gate type) Click here to see a video of the test run (YouTube) upon completion of the maintenance.

Four stirrer paddles

Four paddle blades × 2 steps Motor: 11kw / 440v Power: 11kw | Material: Wetted part: SUS | Quantity saved: 1

SUS tank with coil

Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)