Used Processing in Wallonia, Belgium

Mobile, motorized table with 4 load cellls

Ø 950 mm Gearmotor SEW, 1320/29 rpm, 220/380 V Fix load table, Ø 950 mm For load of 4000 kg

600 mm x 400 mm x 80 mm, 9 kg, brand PRAMAGIORE

430 mm x 340 mm x 90 mm, 10 kg, rolled profile

NEW gassing units LÜBER LW-FDA 425

• Manufacturer: Lüber
• Model: LW-FDA 415

With heating 4 kW Max core weight 15 kg (± 10 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" With micro pump, gasdosing by rotameter Compressed air regulation by proportiona...

400 mm x 400 mm x 150 mm, 17 kg

450 mm x 350 mm x 100 mm, 13 kg

930 mm x 850 mm x 350 mm, good casting plates GS; 224,4 kg

Dosing screw inox 1050 mm, Ø 110 mm

• Manufacturer: Stahl

Brand: SIETANWeight: ± 100 kgTotal length: 1750 mmInternal dimensions: length 1050 mm, Ø 110 mmMotor BAUER 0,37 kW; 1460/360 rpm (47.5 / 12) 380VDrive via chain and gear wheelDownstairs openWith strap for attachm...

Mobile suction trunk for dust and fumes

• Manufacturer: Nedermann

Type: 535, serial number: 522335 With wall bracket/console (see freehand sketch)

Moulding box, welded, 430 mm x 350 mm x 150 mm, 9,5 kg

Sand reclamation SEGAB/ KLEIN, 20 t/h

• Manufacturer: Segab

Shake-out SEGAB, max. loading 20 t, dimensions 5 m x 3 m 3 x sand feeder SEGAB Reclaiming SEGAB: - Hot sand silo 150 t - 2 x attrition unit KLEIN - 1 x fluid bath cooler - 2 x sand feeder KLEIN - Electric control...

2006 Motorized casting ladle, 9 t, IBW

With manual gear motor, frequency controlled With control box and remote control With mechanical switch to "tilting by hand" With planet gearbox (possible to use for treatment ladle) With counter weight on the ov...

Pulling tool, G+F, type PZV for PFG unit

Pulling tool Additional device for PFG

2009 Pneumatic sand feeder NEUHOF, with CE type plate, 150 l

Type: PDGF150, serial number: 271 With compressed air-fluidizing base inside With height-adjustable feet With level sensor on the top With pneumatic vent valve and overpressure valve

Annealing furnace electric ELTI, max 700°C

• Manufacturer: ELTI

Type: CFZ, Serial number: 3150 Outside dimensions: width 1750mm; depth1800mm, height 2500mm Max temperature 700°C With 2 blowers/ aerators on the top (220/380V) With vertical pneumatic door With 7 roles inside an...