Used Machine Tools in Greater Poland, Poland

Wide belt grinder Felder FW 1102 C

• Manufacturer: Felder

WIDE BELT GRINDER Felder FW 1102 C grinding width 1100 MM, grinding height 3-170mm 1 unit with calibration rubber shaft with hardness 85, Second unit combined with rubber shaft + grinding foot with smooth pressur...

Low long spindle milling machine Felder F 700 M

• Manufacturer: Felder

Felder F 700 M vertical spindle milling machine Electric up-down spindle regulation and manual angle adjustment from 0 to +45 degrees spindle chuck Ø30 interchangeable long beds 215cm 4 spindle speeds 5.5KW motor...

Hettich hinge drill

• Manufacturer: Hettich

Hettich hinge drilling machine 380V power supply drilling vertically and horizontally 3 drilling heads rotating heads, parallel position - row of holes or perpendicular position stroke of drilling head pneumatic ...

Felder 21 Spindle Drill

• Manufacturer: Felder

Felder 21 Spindle Drill 21 spindles left/right spindles spindle spacing 32mm drilling in vertical, horizontal or at an angle 2 pneumatic clamps power supply 380V, 1.5KW machine used in good condition

Zangheri multi-spindle drilling machine 2 heads

Zangheri MULTI-SPINDLE DRILLING MACHINE, 2 x bottom drilling heads with 21 spindles each, maximum vertical head spacing 800mm, drills mounted with quick-release couplings, left/right spindles, spindle spacing 32m...

Masterwood K21 Multi-Spindle Drill

• Manufacturer: Masterwood

MASTERWOOD MULTI-SPINDLE DRILLING MACHINE, 21 spindles, left/right spindles, quick-release mounting, 32mm spindle spacing, vertical or horizontal drilling, pneumatic clamps, 380V power supply, The machine is full...

Lasm double-sided edge sander

• Manufacturer: Volpato - Lasm

Belt height: 150mm | Oscillation: Mechanical | Electricity demand: 3.6KW | Table adjustment: at an angle | Angle stop: in the countertop

Slotting machine Felder F 700 Z

• Manufacturer: Felder

Slotting machine Felder F 700 Z moving trolley in the table 205 cm, spindle adjustable up-down and at 0-45 degrees spindle Ø 30 interchangeable, motor 7.3 kW, electric brake left-right rotation 4 speed settings V...

Robland circular saw with carriage and milling machine

• Manufacturer: Robland

Robland saw and milling machine, two 2.2 kW, 380V motors, adjustable saw blade up and down and at an angle of 0-45°, milling spindle diameter 30 mm, two spindle speeds: 3000 and 6000 rpm, machine tested and ready...

Griggio 940 Band Saw

• Manufacturer: Griggio

Griggio Band Saw Wheel width: 940mm 5.5kW motor, 380V power supply Tilting table Band dimensions: min. 6590 - max. 6710mm Machine dimensions: h: 286cm, w: 160cm, l: 100cm (can be transported horizontally) Machine...

Altendorf tkr 45 sliding table saw

• Manufacturer: Altendorf

Altendorf TK R 45 sliding table saw, 140cm carriage, 5.5kW main motor, 400 blade capacity, Hydraulically adjustable blade tilt and up-down, 85cm cutting width on the right side, Machine in good condition.

Panhnas 690 type 320cm sliding table saw

Panhans sliding table saw, 320 cm carriage on bars, hydraulic up-down and angle adjustment of the saw blade, 5.5 kW main motor, separate scoring unit, 3 cutting speeds, maximum blade size 400 mm, machine in good ...

APS KS-160 crosscut saw

APS KS-160 Crosscut Saw Cutting width: 450mm Maximum cutting height: 160mm with a material width of approximately 180mm Blade diameter: 550mm Motor: approximately 5.5kW, 380V Material pressure: Pneumatic blade he...

Robland NZ 3800 format saw

• Manufacturer: Robland

Robland NZ3800 sliding table saw with a carriage, scoring unit with a separate motor, carriage length 380 cm, 0-45° tilt adjustment with electrical readout, saw blade up and down adjustment, motorized right-hand ...

Panel Saw Holzmann FKS 315VFN – 3200

• Manufacturer: Holzmann

Panel saw Holzmann FKS 315VFN – 3200 carriage 320 cm, blade height adjustment up-down and angle manually, main motor 5.5 kW, downshooter on a separate motor, 2 cutting speeds, max blade 315 mm, Diameter of the do...