- Trusted Seller
CEMCO 50" DOUBLE-HEAD WIDE-BELT SANDER
- Manufacturer: Cemco
CEMCO 50" DOUBLE-HEAD WIDE-BELT SANDER S/N:WBS-512, (230/460/60/3 electrics), S-5104 Standard Specifications: 50” wide capacity with 6” opening 1st head: 50 HP, 230/460/60/3 motor, (rubber contact drum) 2nd....
Hickory, NC - Trusted Seller
CEMCO 24 INCH, DOUBLE-HEAD WIDE-BELT SANDER
- Manufacturer: Cemco
CEMCO 24", DOUBLE-HEAD WIDE-BELT SANDER S/N:WBS-387, (230/460/60/3 electrics). S-4719 Standard Specifications: * Inquire for additional specifications *
Hickory, NC - Trusted Seller
CEMCO 30 HP BLOWER STYLE VACUUM FOR WIDE-BELT SANDER FEED CONVEYOR
- Manufacturer: Cemco
CEMCO 30 HP BLOWER STYLE VACUUM FOR WIDE-BELT SANDER FEED CONVEYOR (230/460/60/3 electrics), S-4342b General Specifications: - 30 HP, 230/460/3 blower motor - 36" diameter blower - (4) 4" diameter inlets - ...
Hickory, NC 
2000 Cemco Sander 2 Heads
- Manufacturer: Cemco
Cemco 2000 Headed Sander 1st head 30HP Rubber coated contact roll 2nd head 25HP Contact pad 37″ Width 75″ Belt length Pneumatic belt tensioning Electronic abrasive belt tracking Variable speed conveyor feed, 15 –...
Randleman, NC- Trusted Seller
2004 Cemco 2000 Single Head Sander
- Manufacturer: Cemco
Cemco 2000 Wide Belt Fair/good condition. It starts and runs until we unplugged it 12 years ago Belt size 37 x 75 2004 Single head 1- 5” roller top, 2 - 5” rollers bottom, 1 rubber covered, 1 steel. No plat...
USA - Trusted Seller
24” Cemco Heavy Duty Belt Sander
- Manufacturer: Cemco
24” Cemco Heavy Duty Belt Sander Features Powered conveyor Manual table height adjustment Specifications This 24” Cemco is a heavy duty belt sandwer with a 10 HP motor and a 24” x 85” sanding belt. Equipped with ...
Granger, IA - Trusted Seller
2004 CEMCO 2000 SINGLE HEAD WIDE BELT SANDER [SW-280745]
- Manufacturer: Cemco
- Model: 2000
CEMCO 2000 Wide Belt Drum Sander, Single Head. ÷ ÷Specifications: Lightly used. Only 2180 Hours. -- Belt Size is 37" X 75"; 20 HP main motor,.1.5" top roller plus 2- 5" bottom rollers. One steel 1 rubber covered....
$5,840 USDUnited States - Trusted Seller
2000 CEMCO 3 Head Industrial Sander 3000 URF-3352
- Manufacturer: Cemco
- Width capacity 53”. Drum, Drum, Combination Head (see sander specs - Head 1: Rubber covered contact roll, 10” dia, 65 shore adjustable with dial - Head 2: Rubber covered contact roll, 10” dia, 65 shore adjusta...
USA - Trusted Seller
CEMCO 3137 WIDE BELT (1-HEAD 36") [SW-011982]
- Manufacturer: Cemco
CEMCO UF-37-1-103 SINGLE HEAD WIDE BELT SANDER Single head Wide Belt Sander with 36" wide capacity; combination head with 6-1/8" diameter contact roll & independently adjustable platen. Equipped with: -- 30 HP m...
$8,990 USDUnited States - Trusted Seller
CEMCO 1237 WIDE BELT (12" - 39", 2-HEAD) [SX-013100]
- Manufacturer: Cemco
CEMCO 1237 DUAL HEAD WIDE BELT SANDER 2-Head, 36" cap. - 1st Head: Rubber covered contact roll, 20 HP motor; 2nd Head: Finishing platen, 15HP motor; 37" x 75" abrasive belts with air tensioning. -- Variable speed...
$7,995 USDUnited States - Trusted Seller
CEMCO 4000 WIDE BELT (12" - 39", 2-HEAD) [SX-012839]
- Manufacturer: Cemco
CEMCO - 4000, ...2-Head Wide Belt Sander 38" Width cap. - Drum, Platen configuration. Head Configuration: 1st Head: 40 HP -1,780 RPM rubber contact drum head. 2nd Head: 30 HP - 1,775 RPM platen style head. Spec...
$15,260 USDUnited States 
CEMCO 3000
- Manufacturer: Cemco
- Model: 3000
CEMCO 3000 MODEL URF-3352 3 HEAD SANDING MACHINE Power Thickness Adjustment Worm Gear Position Adjustment Digital Readout Variable Speed Feedrate Electric Eye Tracking Hour Meter Percentage Motor Load Meter **BUY...
Phoenix, AZ
CEMCO #WBS-197 48" 3-Head Sander
- Manufacturer: Cemco
Very dependable machine 1st Head: Hard rubber: sand lumber surface, particle board, MBF 2nd Head: 65 lb Soft: For veneers, hardwood, 120 grit, #3 hardware, takes 4/5000ths off Spare 2nd Head Included Has one 75 H...
$3,150 USDEugene, OR
WIDE BELT SANDER - 1 SANDPAPER - 37" WIDE - CEMCO
- Manufacturer: Cemco
WIDE BELT SANDER - 1 SANDPAPER - 37" WIDE - CEMCO USED - GOOD CONDITION Manufactured in 1999 - Combination sanding head with 5 ½" contact drum and 3 ½" platen - 20 HP TEFC Dual Voltage Motor, 460 Volt, 3 Phase, 2...
Chihuahua, Mexico
- WIDE BELT SANDER - TOP AND BOTTOM - 52" WIDE - CEMCO
- Manufacturer: Cemco
PART: 12135 - WIDE BELT SANDER - TOP AND BOTTOM - 52" WIDE - CEMCO USED - IN GOOD CONDITION 3 head Top & 3 head bottom Combination Planer Sander Newman/Whitney helical cutter heads on station #1, followed by 2 sa...
Chihuahua, Mexico
Tip: Enter manufacturer, model or keyword