Processing » CDS

Search By Category

Search By Country

Building Filters

Related Events

Live Now

Acreage Holdings Auction

by Federal Equipment - Auctions (Proxio Group)

Online
Ends Jan 7th, 16:00 CST
View event
25

Used CDS Processing

  • CDS CTS6.5-13 UP CUT PROFILE

    CDS CTS6.5-13 UP CUT PROFILE 18525

    • Manufacturer: CDS

    One (1) used CDS model CTS 6.5-13 air traveling up-cut profile saw. S/N 051106. Unit rated to 13″ wide x 3.5″ high profiles, 6″ high x 2.5″ wide profile and 6.5″ OD pipe. 18″ diameter saw blade. 575/3/60. 3 amps....

    Elk Grove Village, IL
  • CDS CBH36-6 6″ X 36″

    CDS CBH36-6 6″ X 36″ 18259

    • Manufacturer: CDS

    CDS model CBH 36-6 belt puller. S/N 230202. Has nominal 6″ wide belts with 36″ of belt contact length. Set up for right to left operation. Top and bottom belt manually height adjustable via hand wheel. Belts are ...

    Elk Grove Village, IL
  • Trusted Seller
    CDS CSFK 2.5D

    CDS CSFK 2.5D

    • Manufacturer: CDS

    Used CDS dual head Servo driven fly knife cutter, with models CSFK2.5D-L and CSFK 2.5D, serial #110404 cutters. 460 volt AC input. New 2004. Will accommodate 2-lane extrusion of profiles. Cutting capacity 1/16" t...

    Hainesport, NJ
  • CDS CCH40-8DL DUAL LANE PULLER

    CDS CCH40-8DL DUAL LANE PULLER 18679

    • Manufacturer: CDS

    CDS model CCH 40-8DL dual lane cleat type puller. S/N 190705. Each puller has 7 ½” wide cleats with 42″ of contact length. Pneumatically actuated upper beam. Maximum 7″ opening between the cleats. 460/1/60 input ...

    Elk Grove Village, IL
  • CDS CCH40-8D DUAL LANE PULLER

    CDS CCH40-8D DUAL LANE PULLER 18680

    • Manufacturer: CDS

    CDS model CCH40-8D dual lane cleat type puller. S/N 330706. Each puller has 7 ½” wide cleats with 42″ of contact length. Pneumatically actuated upper beam. Maximum 7″ opening between the cleats. 460/1/60 input po...

    Elk Grove Village, IL
  • Trusted Seller
    CDS CBH25-4

    CDS CBH25-4

    • Manufacturer: CDS

    Used CDS 2-belt Puller. Model CBH 25-4, serial #14772-030811. Has nominal 4" wide belts x 25" of contact length. Gap is manually adjustable via hand wheel on top belt. Driven by a 1.5 hp DC motor with SCR control...

    Hainesport, NJ
  • Trusted Seller
    20' CDS Vacuum Sizing Tank,

    20' CDS Vacuum Sizing Tank, 16" Wide

    • Manufacturer: CDS

    Used 20' CDS Vacuum Sizing Tank, 16" Wide x 12" Deep 16" Width, 18 Water Outlets, 18 Vacuum Outlets, 4 Kw Water Ring Vacuum Pump, 3 Hp Process Pump, With Inline Filter, Plate And Frame Heat Exchanger, Comes With ...

    United States
  • Trusted Seller
    20' CDS Vacuum Sizing Tank,

    20' CDS Vacuum Sizing Tank, 16" Wide

    • Manufacturer: CDS

    Used 20' CDS Vacuum Sizing Tank, 16" Wide 16" Width, 18 Water Outlets, 18 Vacuum Outlets 36" Primary Section, (4) 48" Sections, (1) 12" Section 7.5 HP Marathon Vacuum Pump 3 HP Baldor Recirculation Pump Control P...

    United States
  • Trusted Seller
    8" x 60" CDS Puller

    8" x 60" CDS Puller Model CCH60-8

    • Manufacturer: CDS

    Used 8" x 60" CDS Puller Cleated Puller, Model CCH60-8AC Belts Individually Driven By (2) 5hp AC Baldor Inverter Drive Motors, 1760-6000RPM, Nord Gearbox Pneumatic Belt Up/Down, Puller Speed 4-40 Durant Digital ...

    United States
  • Trusted Seller
    14' Long CDS Vacuum Sizing

    14' Long CDS Vacuum Sizing Tank 12" x 12" Cross Section

    • Manufacturer: CDS

    Used 14' Long CDS Vacuum Sizing Tank 12" x 12" Cross Section Model CVS 12-14 (2) 7.5 HP Vacuum Pumps 1 HP Recirculation Pump 2' Primary Section (2) 6" Secondary Sections 6" Diameter Bulkhead Opening 42" +/- 3" Ce...

    United States
  • Trusted Seller
    8" x 60" CDS Cleated

    8" x 60" CDS Cleated Puller, Model CCH60-8V-L

    • Manufacturer: CDS

    Used 8" x 60" CDS Cleated Puller, Model CCH60-8V-L (2) 2hp AC Motors with 58.27 Gearbox Ratio Nord Gearboxes Left To Right Operation Dual ABB AC Drives Pneumatic Open/Close Durant ft/min & Load Percentage Gauges ...

    United States
  • Trusted Seller
    20' CDS Vacuum Sizing Tank,

    20' CDS Vacuum Sizing Tank, 16" W x 12" H Cross Section

    • Manufacturer: CDS

    Used 20' CDS Vacuum Sizing Tank, 16" Wide 16" Width, 18 Water Outlets, 18 Vacuum Outlets 7.5 HP Marathon Vacuum Pump 3 HP Baldor Recirculation Pump Control Panel 130" L x 15" W x 14" H Holding Tank Plate & Frame ...

    United States
  • Trusted Seller
    14' CDS Stainless Steel Vacuum

    14' CDS Stainless Steel Vacuum Calibration Table Model CVC 14-475 LH

    • Manufacturer: CDS

    Used 14' CDS Stainless Steel Vacuum Calibration Table Model CVC 14-475 LH, Table Size 2.5 X 14 FT 14" Center to Center Width Between Mounting Holes (4) 7.5HP Baldor Vacuum Pumps 575/3/60, 8A 1725 RPM, 213TC Frame...

    United States
  • Trusted Seller
    14' CDS Stainless Steel Vacuum

    14' CDS Stainless Steel Vacuum Calibration Table Model CVC 14-475 LH

    • Manufacturer: CDS

    Used 14' CDS Stainless Steel Vacuum Calibration Table Model CVC 14-475 LH Table Size 2.5 X 14 FT 14" Center to Center Width Between Mounting Holes (4) 7.5HP Baldor Vacuum Pumps 575/3/60, 8A 1725 RPM, 213TC Frame ...

    United States
  • Trusted Seller
    CDS Double Miter Upcut Saw,

    CDS Double Miter Upcut Saw, Model CSTMS 4.5-D

    • Manufacturer: CDS

    Used CDS Upcut Saw, Model CSTMS 4.5-8 Servo Travelling Miter Saw 26" Table Travel (2) 12" Carbide Tipped Saw Blades with (2) 2 Hp AC Motors +-.020" Length Accuracy 2 Blades Capable of Cutting Opposing 45 Degree A...

    United States
12