Used Machine Tools in Hesse, Germany

Trusted Seller
DECKEL S 1
- Manufacturer: Deckel / Maho
- Model: DECKEL S1
Additional Features Used universal tool grinder Accessories Material clamp on the table slide, grinding wheel holder, grinding wheel dressing device
Wiesbaden, Germany
Trusted Seller
2000 NAGEL SCD 200 1113-235072
- Manufacturer: Nagel
- Power requirement: 12 kW
Until now, the machine has machined the parts in a line, i.e. without interruption. Piston rods are usually machined with a gap, for which it is necessary to place the finishing stone only when the part runs unde...
Staufenberg, Germany
Trusted Seller
1988 BOLLA LUX FA 65 SVC
- Manufacturer: Bolla
Add-ons Little-used and very well-maintained CNC-controlled vertical and copy milling machine, equipped with the FIDIA ADDENDUM V 05-E CNC 12 control system, including digitizing and shrinkage measurement. Access...
Wiesbaden, Germany
Trusted Seller
Rotating, swivel and tilting table DECKEL
- Manufacturer: Deckel / Maho
Addition: Little-used and very well-maintained rotary, tilting, and swivel table, suitable for DECKEL FP 3 L; FP 3 LG; FP 3 LV milling machines. Further information: 6 16 mm chip slots, 90 mm slot spacing, horizo...
Wiesbaden, Germany
Trusted Seller
SCHLEITH & Co. No. 5
- Manufacturer: SCHLEITH & Co.
Additional Precision vise for surface grinding machines Accessories Double-sided chip grooves Further information Jaw width 100 mm, jaw height 40 mm, clamping range 125 mm, overall height 80 mm
Wiesbaden, Germany
Trusted Seller
Rotating, swivel and tilting table DECKEL
- Manufacturer: Deckel / Maho
Add-on Very well-maintained rotary, tilt, and swivel table, suitable for: FP 3 L; FP 3 LG; and FP 3 LV Further information 6 T-slots 16 mm, T-slot spacing 90 mm, horizontal rotation to the right and left by 45° e...
Wiesbaden, Germany
Trusted Seller
1980 PFERD MB 12/120
- Manufacturer: PFERD
Additional Information Used pneumatic grinder, with rotary handle. Further Information Speed 12,000 rpm, power 900 W, 6 mm collet chuck, air consumption approx. 1.3 m³/min, required operating pressure 6 bar, leng...
Wiesbaden, Germany
Trusted Seller
2002 DECKEL MAHO DMU 60T 1113-210055
- Manufacturer: Deckel / Maho
- Model: DMU 60 T
5-axis machine Rotary table B-axis Control type: CNC | Control name: Heidenhain TNC 426/430 | Freight basis: FCA | X-off: 630 mm | Y-off: 560 mm | Z-way: 560 mm | Machine weight approx.: 6,5 t | Number of axes: 5...
Staufenberg, Germany
Trusted Seller
2004 DMG DMU60 P 1113-24019
- Manufacturer: DMG Mori
- Model: DMU 60
Machine type 5axis CNC milling machine Manufacturer DMG Type DMU 60 P
Staufenberg, Germany
Trusted Seller
2010 MIKRON Multistar CX-24/1500R 1113-90055
- Manufacturer: Mikron
- Model: Multistar CX-24
The Mikron Multistar CX-24 is ideal for demanding mass and series production of part families and workpieces in various industries, including the electrical, automotive, gas, medical technology, and watchmaking i...
Staufenberg, Germany
Trusted Seller
2005 SCHÜCO PBS
- Manufacturer: Schüco
- Model: PBS
Manufacturer: SCHÜCO Model: PBS Type of Machine :Profile Processing System Technical Data - Travel Range: - X-Axis: 6850 mm - Y-Axis: 800 mm - Z-Axis: 500 mm - Rotation: - B-Axis: 0 to 90° continuously adjust...
Frankfurt, Germany
Trusted Seller
2004 DMG DECKEL MAHO DMC 60T 1113-25010
- Manufacturer: Deckel / Maho
- Model: DMC 60 T
5-axis machine Rotary table B-axis Control type: CNC | Control name: Heidenhain | Freight basis: FCA | X-off: 780 mm | Y-off: 560 mm | Z-way: 560 mm | Machine weight approx.: 10 t | Number of axes: 5 pc. | Spindl...
Staufenberg, Germany
Trusted Seller
1986 MORI SEIKI MV 45 1113-23031
- Manufacturer: Mori Seiki
- Model: MV-45
- Spindle taper: CAT 40
- Power requirement: 20 kW
Vertical machining center 20kW is the nominal value. The spindle only needs 7.5 kW. It looks like 15kW will be enough.
Staufenberg, Germany
Trusted Seller
1998 HITACHI SEIKI VM40III 1113-23032
- Manufacturer: Hitachi Seiki
- Model: VM40III
- Power requirement: 20 kW
Vertical machining center Control type: CNC | Control name: Seicos | Freight basis: ex stock, free loading | X-off: 560 mm | Y-off: 450 mm | Z-way: 450 mm | Table surface: 760 x 410 mm | Speed range: 8.000 U/min ...
Staufenberg, Germany
Trusted Seller
2002 STAMA MC 536 /S 1113-2100078
- Manufacturer: Stama
- Model: MC
- Power requirement: 36.8 kW
Travel path can be used as a whole or divided into two areas for pendulum machining. 3 axes HSK 100
Staufenberg, Germany