Used ~4' x in Germany

Gemac shelving unit Normafix large compartment shelving unit 7.50 x 1.20 x 2.50 m boltless shelving unit

• Manufacturer: Gemac

Normafix Large Shelving Unit Gemac large shelving units are particularly well-suited for double-sided access without disruptive diagonal bracing when goods are pushed through from the replenishment to the picking...

Sprocket Duplex from – 20B-2-12 teeth 1 1/4 inch 35318

• Manufacturer: ZOLL

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket

1987 Stahl TX 52/4-4

• Manufacturer: Stahl
• Maximum sheet size: 520x800 mm

Stahl TX 52/4-4 Equipment: FX 52A Flatpile Feeder 2 nd With Delivery

Stainless steel work stitch approx. 200 x 70 x 75 cm

Stainless steel worktop approx. 200 x 70 x 75 cm, with upstand, drawer unit 4 drawers on the left side, cabinet with stainless steel door

Stainless steel work stitch approx. 160 x 70 x 75 cm

Stainless steel worktop approx. 160 x 70 x 75 cm, without upstand, drawer unit 4 drawers on the left side, cabinet with stainless steel door

Electric motor 4 kW 1440 rpm from – AP112M-4 20263

Three-phase motor, electric motor Number of revolutions: 1440 rpm | Wave: Ø 28 x 35 mm | Mounting position: B3 | Protection type: IP 44 | Dimensions: 385/300 / H230 mm | Mass: 52 | Internal storage: 2A60605

1994 MBO T500-2-X

• Manufacturer: MBO
• Model: T500-2-X

Serial No. M12/42, Flatpile Feeder, Overhead Control Panel, 4 Pockets, 1 Cross Fold Knife, Delivery

SIEMENS Siremobil x-ray tube

• Manufacturer: Siemens
• Model: Siremobil

X-ray tube for Siremobil C-arm, sg.Zst.

Pallmann PS 4 / 5

• Manufacturer: Pallmann

granulator Drive: Length 2000mm x Width 1300mm x Height 3100mm | Speed of the rotor: 165 mm | Engine: 30 kW | Number of revolutions rotor: 645

1989 DECKEL FP 4 MA

• Manufacturer: Deckel / Maho
• Model: FP 4

Additional Used CNC tool milling machine, equipped with CONTOUR 2 control Accessories Electrical equipment, coolant system, chip collection tray, hydraulic tool clamp

GRAULE AKF 4/250

• Manufacturer: Graule
• Model: AKF 4250

Additional information Used end milling machine, table-mounted Accessories Carbide cutters Further information For cutter diameters up to 250 mm, Cutter stack height max. 90 mm, Maximum profile height to be machi...

ASM SIPLACE 24mm X-Feeder Smart 00141393-01 00141373-01

• Manufacturer: ASM

ASM SIPLACE 24mm X-Feeder Smart 00141393-01 00141373-01 24mm X Feeder Smart used checked Cleaned and tested on the original ASM Verification System On request (if available also NEW) Feeder on request with or wit...