Search By Category

Search By Manufacturer

Search By Prefecture

Building Filters

2440

Used working in Japan

  • Shikuguchi Iron Works Cylinder Vertical

    Shikuguchi Iron Works Cylinder Vertical

    • Manufacturer: Shikuguchi Iron Works

    With stirrer Jacket not available Power: 1.5kw | Material: SUS | Quantity saved: One

    Hiroshima, Japan
  • Oshima Iron Works BM-400

    Oshima Iron Works BM-400

    • Manufacturer: Oshima

    Material: SS Capacity: 450L Lining: Alumina ceramic With ball

    Hiroshima, Japan
  • Oshima Iron Works BM-440

    Oshima Iron Works BM-440

    • Manufacturer: Oshima

    Motor 3.7kw Capacity: 450L Material: SS, Inner lining: alumina ceramic No ball

    Hiroshima, Japan
  • Oshima Iron Works BM-400

    Oshima Iron Works BM-400

    • Manufacturer: Oshima

    Material: SS, Capacity: 460L Interior lining: alumina ceramic No ball

    Hiroshima, Japan
  • Nishihara Works HW-3A

    Nishihara Works HW-3A

    • Manufacturer: Nishihara Seisakusho

    積載重量：100Kg/カゴ 蒸気量：蒸気圧力5Kg/㎠ 蒸発量：150Kg/H 【メーカーホームページURL】

    Hiroshima, Japan
  • Shimazaki Works RF 04

    Shimazaki Works RF 04

    • Manufacturer: Shimazaki Seisakusho

    0.4kw (cyclo), 25rpm (60Hz), anchor blade Shaft: Φ40 x 1988H Reduction ratio 1/71

    Hiroshima, Japan
  • Shimazaki Works Cylindrical Vertical

    Shimazaki Works Cylindrical Vertical

    • Manufacturer: Shimazaki Seisakusho

    For medium viscosity (7000CP) 11kw cheaper 3-stage blades, filling volume: 1200L, Jacket: Yes Agitator: 11kw, low cost Shape: Bottom dish mirror Previous experience: Used in adhesive manufacturing process

    Hiroshima, Japan
  • Trusted Seller
    2008 Takizawa Iron Works TAL600x3000

    2008 Takizawa Iron Works TAL600x3000

    • Manufacturer: Takizawa Iron Works

    Machine Specifications ○Spindle Chuck: 12-inch, 3-jaw scroll ○Swing/Capacity Bed Swing: φ600mm Cross Feed Swing: φ380mm ○Bed Dimensions Center Distance: 3000mm Bed Length: 4370mm Bed Width: 430mm ○Spindle Spindle...

    Tokyo, Japan
  • 1991 [Nishijima Iron Works] Garbage

    1991 [Nishijima Iron Works] Garbage collector

    • Manufacturer: Nishijima Iron Works
    • Horsepower: 7 hp

    5.5kw geared motor This device removes foreign materials such as vinyl by passing raw materials through the machine.

    Hiroshima, Japan
  • Ishikawa Toki Works Y-05E

    Ishikawa Toki Works Y-05E

    • Manufacturer: Ishikawa Toki Works

    Powder contact material: SUS Built-in vacuum pump Quantity saved: 1

    Hiroshima, Japan
  • Araki Iron Works SRG-490

    Araki Iron Works SRG-490

    • Manufacturer: 荒木鉄工

    Motor: Dispersion 22Kw 4P200V (Explosion-proof) Agitation 7.5Kw Hydraulic 1.5Kw With hand control panel Remarks With inverter (2 pcs.)

    Hiroshima, Japan
  • 2012 Ogawara Works HDS-100

    2012 Ogawara Works HDS-100

    • Manufacturer: 大川原製作所

    Heating capacity: 110kw, Cooling capacity: 81kw Air blowing capacity: 3900Nm3/h, Heat source water volume: 231L/min Manufacturer's introduction page: Remarks Mainly composed of one CO2 hot air heat pump system, ...

    Hiroshima, Japan
  • ［Kameshima Iron Works] Pump No

    ［Kameshima Iron Works] Pump No model

    • Manufacturer: 亀嶋鐵工所

    Motor: 0.75kw Gear pump Purchasing area: 60Hz | Quantity saved: 1

    Hiroshima, Japan
  • Nakanishi Iron Works NC-30

    Nakanishi Iron Works NC-30

    • Manufacturer: Nakanishi ironwork

    Remarks. Older age, but clean. Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: １ | Size: Container dimensions: φ900 x 800 Aperture: φ580 with lid

    Hiroshima, Japan
  • Okuma Iron Works LS

    Okuma Iron Works LS

    • Manufacturer: Okuma
    • Model: LS

    450φ4 jaw single action chuck Spindle speed 19-1000rpm 800 between centers Swing on bed 540 If there is any discrepancy between the contents and the actual product, the actual product will take priority.

    Tatebayashi, Japan
12345