Used working in Japan

2012 Ogawara Works HDS-100
- Manufacturer: Okawara Works
Heating capacity: 110kw, Cooling capacity: 81kw Air blowing capacity: 3900Nm3/h, Heat source water volume: 231L/min Manufacturer's introduction page: Remarks Mainly composed of one CO2 hot air heat pump system, ...
Hiroshima, Japan
［Kameshima Iron Works] Pump No model
- Manufacturer: Kamejima Works
Motor: 0.75kw Gear pump Purchasing area: 60Hz | Quantity saved: 1
Hiroshima, Japan
Shikuguchi Iron Works Cylinder Vertical
- Manufacturer: Shikuguchi Iron Works
With stirrer Jacket not available Power: 1.5kw | Material: SUS | Quantity saved: One
Hiroshima, Japan
Oshima Iron Works BM-400
- Manufacturer: Oshima
Material: SS Capacity: 450L Lining: Alumina ceramic With ball
Hiroshima, Japan
Oshima Iron Works BM-440
- Manufacturer: Oshima
Motor 3.7kw Capacity: 450L Material: SS, Inner lining: alumina ceramic No ball
Hiroshima, Japan
Oshima Iron Works BM-400
- Manufacturer: Oshima
Material: SS, Capacity: 460L Interior lining: alumina ceramic No ball
Hiroshima, Japan
Nishihara Works HW-3A
- Manufacturer: Nishihara Seisakusho
積載重量：100Kg/カゴ蒸気量：蒸気圧力5Kg/㎠蒸発量：150Kg/H 【メーカーホームページURL】
Hiroshima, Japan
Trusted Seller
2015 Takizawa Iron Works TCN-3500 L10
- Manufacturer: Takizawa Iron Works
Machine specifications ○ NC system FANUC-32iB ○ Main spindle Chuck 10 inch three-jaw Kitagawa B-210 Spindle speed 2500 rpm Motor 15/11 kW 30 min / continuous ○ Capacity Vibration on bed φ490 mm Maximum workpiece ...
Tokyo, Japan
Trusted Seller
2008 Takizawa Iron Works TAL600x3000
- Manufacturer: Takizawa Iron Works
Machine Specifications ○Spindle Chuck: 12-inch, 3-jaw scroll ○Swing/Capacity Bed Swing: φ600mm Cross Feed Swing: φ380mm ○Bed Dimensions Center Distance: 3000mm Bed Length: 4370mm Bed Width: 430mm ○Spindle Spindle...
Tokyo, Japan
Kamejima Iron Works ME-1S
- Manufacturer: Kamejima Works
ME-1S Pump main body 1 set Unused Power: None | Purchasing area: 60Hz | Quantity saved: 1
Hiroshima, Japan
1991 [Nishijima Iron Works] Garbage collector
- Manufacturer: Nishijima Iron Works
- Horsepower: 7 hp
5.5kw geared motor This device removes foreign materials such as vinyl by passing raw materials through the machine.
Hiroshima, Japan
Ishikawa Toki Works Y-05E
- Manufacturer: Ishikawa Toki Works
Powder contact material: SUS Built-in vacuum pump Quantity saved: 1
Hiroshima, Japan
Araki Iron Works SRG-490
- Manufacturer: Araki Ironworks
Motor: Dispersion 22Kw 4P200V (Explosion-proof) Agitation 7.5Kw Hydraulic 1.5Kw With hand control panel Remarks With inverter (2 pcs.)
Hiroshima, Japan
Nakanishi Iron Works NC-30
- Manufacturer: Nakanishi ironwork
Remarks. Older age, but clean. Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: １ | Size: Container dimensions: φ900 x 800 Aperture: φ580 with lid
Hiroshima, Japan
Okuma Iron Works LS
- Manufacturer: Okuma
- Model: LS
450φ4 jaw single action chuck Spindle speed 19-1000rpm 800 between centers Swing on bed 540 If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan