Used weaving machines

(c/r #162-210) Wafios ZF-2 Wire Ornamental Border Fence Weaving Machines

• Manufacturer: Wafios

Height of fence: 0.40 Mt. (15.75″) and 0.65 Mt. (25.59″) Horizontal wire dia.: 2 to 3 mm Vertical wire dia.: .55 to 2.3 mm automatic roll take- up 380-400v 50 hz. operational 2 available

Tufting Machine Co, 8-18 Pass Machine

Tufting Machine Co, Model 8-18, 1/10th gauge, loop pile pass machine with 5 ft table. SN 1569 Tufting 4 inches. WS2410

Tufting Machine Company 8-18, 12 inch pass machine

Tufting Machine Company Model 8-18, 12 inch pass machine mounted on 48 inch table. 1/10 gauge loop currently tufting 2-5th gauge. WS1965

Phenix Tufting Machine List

• Manufacturer: Lista

List of available tufting machines at Phenix Mills in Dalton, GA. See link below. PHENIX TUFTING MACHINES: Tufting Machine List 12-15-25, WS3051 (Search for individual machines by using the 4 digit WS#### under U...

1985 4m, CMC loop tufting machine frame

4 meter, CMC loop frame with front and rear 5 inch yarn feed rollers, single 5/32nd gauge staggered needle bar with 24 inch cam shifter. Year 1985. WS2252

CMC 1-10th gauge, Cut Pile Sample Machine

CMC 1-10th gauge cut pile sample machine with two shifting needle bars. Currently tufting 24″ wide. Plate frame. Servo needle bar shifters. WS2692

15 ft, Cobble 1/4th gauge loop pile tufting machine

15 ft, Cobble 1/4th gauge loop pile tufting machine. Currently sewing 12 ft. Eccentric roller. No shifter. WS1985.

2017 CMC 4 Meter, 1/8th gauge LCL Tufting Machine

CMC 4 Meter, 1/8 th gauge LCL Tufting Machine. W53 YOM 2017 In-line needle bar Command Performance G2 Servo yarn/cloth/shifter 800 RPMs Tufting 144”. Max width 146”. Pile height 16/32” Front servo yarn feed Curre...

Tuftco 5/64th gauge cut & loop sample machine

5/64th gauge Tuftco cut & loop sample machine. 2 pile height clutch yarn feed front and rear. Front has standard loop pile looper and rear has looper with fixed clip. Currently tufting 16 inches wide but can tuft...

B&J 1/8th Gauge Cut Pile and Loop Pile Sample Machine

B&J 1/8th gauge cut pile and & loop pile sample machine. S03 Half machine is cut and half is loop. 4″ dual yarn feed. Tufting 28″ each side.

1997 1/10th gauge, 5 Meter FRS Loop Pile Tufting Machine

1/10th gauge, 5 meter Cobble FRS tufting machine with servo yarn feed front and rear. YOM 1997. Servo cloth feed. WS2754

1993 4 meter Tuftco 1/10th gauge graphics loop tufting machine

4 meter Tuftco 1/10 th gauge graphics loop tufting machine. YOM 1993. Currently tufting 146” width. Dual 5” yarn feed rollers with Tuftco Hydra shifters and inverter. Model 110165693-S. WS2503

2020 Wanrooetech grinder

2020 Wanrooetech grinder. Model # 42/08 55 KW 480-volt / 3 phase / 60hz. Inlet is 28″ x 33″ Outlet is 20″ x 20″

2003 5 meter 1/7 Gauge Cobble Colortec Tufting Machine

5 meter 1/7 gauge Cobble Colortec cut pile tufting machine. M17. YOM 2003. Tufting 15 ft wide. Servo shifting, Servo in-feed and out-feed. Running 400 RPMs 1 Electrical panel with transformer. Voltage is 460 Volt...

1988 CMC 4 Meter, 1/8th gauge Cut Pile Tufting Machine

CMC 4 Meter, 1/8 th gauge Cut Pile Tufting Machine. B55 YOM 1988 In-line needle bar Command Performance Inverter 1000 RPMs Tufting 144”. Max width 162”. Pile height 28/32” Rear yarn feed 24” cam shifter TTQ loope...