Used variable speed in Pennsylvania, USA

1972 TISHKEN ST2-C02

• Manufacturer: Tishken

Roll size: 6" Diameter x 4" Width (152.4mm x 101.6mm) | Type mill: Wire Flattening & Cut Off | Mill drive motor: 10 HP Variable Speed 40 to 130 FPM | Equipped with: Cut Off:  Cut A MaticModel:  CO2 2 PostTonnage...

1981 AJAX #175 Instacut

• Manufacturer: Ajax

Maximum bar diameter: 1-3/4" Low Carbon Steel | Maximum cut length: 48" | Minimum cut length: 2 Times Diameter | Main motor: 15 HP, AC, 230/460/3/60 | Feed motor: 3/4 HP, DC, 1750 RPM | Exit conveyor motor: 1/3 ...

HARDINGE TFB-H

• Manufacturer: Hardinge
• Model: TFB-H

Spindle capacity: With Square 5C Collets: 3/4" | Variable spindle speeds: 125 to 3000 r.p.m. | Swing over bed: 11" | Swing over carriage: 9" | Swing over cross slide: 6" | Distance between centers: 18" | Electr...

2017 Bloemhof 860L Variable Speed Commercial Bakery Bread Roll Dough Moulder

Beautiful units, tested and in good working condition. All were manufactured in 2017. Just pulled from local bakery departments!

NILSON S-3F

• Manufacturer: Nilson

Basic wire diameter: 3/16" (4.8mm) | Maximum width strip: 2" (51mm) | Standard feed length: 15" (381mm) | Spm: 32 - 130 | Front slide stroke: 1-3/4" (45mm) | Side slide stroke: 3-1/2" (89mm) | Rear slide stroke:...

Thai Feng TF-700 Resaw Stock #7562

• Manufacturer: Thai Feng

Thai Feng Model TF-700 Vertical Resaw Very late model; the seller only ran approx. 2,000' of lumber through this machine before they decided to close the plant. This item is part of a liquidation. The owner will ...

Danfoss VLT5008PT5B20SBR3DLF10A00C0

• Manufacturer: Danfoss
• Model: VLT5008

“UNTESTED. MISSING OPERATOR PANEL/CONTROLLER” Danfoss VLT 5008 175Z0570 12.2A Variable Speed Drive 380-500V 0-1000Hz Danfoss VLT 5008 175Z0570 12.2A Variable Speed Drive 380-500V 0-1000Hz Shipping Shipping cost: ...

KYSOR JOHNSON HA-16

• Manufacturer: Kysor Johnson

Sawing capacity (round): 16" | Sawing capacity (rectangular): 17-3/4" x 10" | Blade speed variable: 65 to 400 FPM | 5 hp blade motor: 3/60/220-440 | 2 hp hydraulic pump motor: 3/60/220-440 | Approx. weight: 500 ...

Rexroth FELB02.1N-30K0-NNONE-A-560-NNNN VFD Brake/Braking Unit 15A 30kW

• Manufacturer: Bosch - Rexroth

“IN GOOD CONDITION.” Rexroth FELB02.1N-30K0-NNONE-A-560-NNNN VFD Brake/Braking Unit 15A 30kW Rexroth FELB02.1N-30K0-NNONE-A-560-NNNN VFD Brake/Braking Unit 15A 30kW The Rexroth FELB02.1N-30K0-NNONE-A-560-NNNN is ...

Holz-Her Triathlon 1485 Edgebander Stock #25979

• Manufacturer: Holz-Her
• Model: Triathlon

Holz-Her Model Triathlon 1485 Edgebander Edgebanding Capabilities:

Homag KAL210 Ambition 2262 Edgebander Stock #25973

• Manufacturer: Homag
• Model: KAL

Homag Model KAL210 Ambition 2262 Edgebander Edgebanding Thickness Capacity: Strips - 0.4mm - 6mm (0.16" - 15/64") Coils - 0.3mm - 3mm (0.12" - 1/8") Adjustable Infeed Fence Panel Pre-Heater Pressure Unit Power Co...

1986 TESKER 30

• Manufacturer: TESKER

Capacity: 5/8" Maximum Diameter | Rolling pressure adjustable to: Fixed | Motors spindle drive: 15 HP | Hydraulic coolant: 1/4 HP | Maximum diameter (dies): 4-7/8" | Maximum die face width: 3" | Standard spindle...

1990 TESKER 30

• Manufacturer: TESKER

Capacity: 5/8" Maximum Diameter | Rolling pressure adjustable to: Fixed | Motors spindle drive: 15 HP | Hydraulic coolant: 1/4 HP | Maximum diameter (dies): 4-7/8" | Maximum die face width: 3" | Standard spindle...

STANAT 1,000 lb

• Manufacturer: Stanat

Equipped with: Capacity:  Approximately 1,000 lbs (454.5 Kg)Speed:  Variable up to approximately 500 FPM (Based on Diameter of Driving Flange)Drive Motor:  15 HP 1775 RPM Vector Duty AC Motor    230/460 Volt 3 P...

1954 NORTON 6" x 18" Hydraulic

• Manufacturer: Norton
• Model: 6 X 18

Incremental downfeed: yes | Equipped with: Has a 6" x 12" Magnalock HR612 chuckCapacity Longitudinal: 18"Capacity Transverse: 6"Vertical Distance (Table Top to Bottom of Wheel): 10-1/4"Vertical Movement of Wheel...