Used variable speed in Osaka, Japan

Ideal Science Industry SD 5680

Function: Maximum printing (A 3) Resolution 300 × 600 dpi | Printing speed: 60 to 130 sheets / minute (variable in 5 steps) | Size (mm): Width 780 Inside 705 High 1060 Width 1415 (when paper feed table / paper d...

Ideal Science Industry SD 5480

Function: Maximum printing (B4) Resolution 300 × 600 dpi | Printing speed: 60 to 130 sheets / minute (variable in 5 steps) | Size (mm): Width 780 Inside 705 High 1060 Width 1415 (when paper feed table / paper di...

2008 KURAKI CMN-5CHL

• Manufacturer: クラキ
• Model: CMN5

Distance from table top to vertical spindle end : 150 to 1,000 mm W (horizontal spindle head up/down) : 1,050 mm Max. spindle (vertical/horizontal) rotation speed : 20 to 3,000 rpm Horizontal spindle-quill travel...

2016 MAKINO L2 (aircraft number 344)

• Manufacturer: 牧野フライス
• Model: L2

Travel: X: 400 mm Y: 300 mm Z: 300 mm Stroke-Extended type (X: 400 mm Y: 300 mm Z: 300 mm) APC A axis table ( 0.001°indexing) Coolant and air through spindle (7.0Mpa) Scale feedback for X/Y/Z axis (0.05μm) Scrape...

2016 MAKINO L2 (aircraft number 346)

• Manufacturer: 牧野フライス
• Model: L2

Travel : X : 400 mm Y : 300 mm Z : 300 mm Stroke-Extended type (X : 400 mm Y : 300 mm Z : 300 mm) APC A axis table ( 0.001°indexing) Coolant and air through spindle (7.0Mpa) Scale feedback for X/Y/Z axis (0.05μm)...

2015 DMG MORI NLX2000MC/500

• Manufacturer: DMG森精機
• Model: NLX 2000

Travel X: 260 Z: 590 mm 8 "Hydraulic hollow 3-jaw chuck Chip conveyor (Right) In-machine tool presetter MAPPSⅣB Program memory capacity 2MB 320m Number of registerable programs 200 Custom macro common variable 200

2010 KURAKI KBT-13A

• Manufacturer: クラキ
• Model: KBT13A

Distance from Table Top to Spindle Center: -50 to 1950 mm Stroke Extension X: 4000 Z: 2000 Table Thickness Increased by 50mm: 0～2,000mm → Changed to -50～1,950mm Manual Pulse Handle External Air Blow Rigid Tap (In...

Spex Sample Prep Hammer-Cutter Mill

• Manufacturer: Spex

Combination hammer mill and cutting mill that accommodates sample sizes ranging from 10 - 100 grams. Ideal for rapidly pulverizing dry, friable samples. CE Approved. Typical samples include: Dried Plants, Roots, ...

DYNAS3

• Manufacturer: HORIBA Europe GmbH

AC Dynamometer DYNAS3 dynamometers are specially designed for use in engine test stands. The combination of the powerful DYNAS AC machine with a variable frequency drive, fine-tuned test stand controller and prov...

HORIBA STEC, Co., Ltd. SEC-Z700X Series

• Manufacturer: Horiba

Pressure Insensitive Mass Flow Controller The SEC-Z700X Series is equipped with reliable thermal sensors and a pressure insensitive function for stable flow rate control. The on-board pressure measurement reduces...

Atex Co., Ltd./Shikoku Manufacturing Co., Ltd. MSX650

• Manufacturer: （株）アテックス/四国製作所

Classification: Pest control, disinfection and fertilization machinery | Other: Maximum working capacity 650/variable speed

SEIBUKOKI LATHE LHT-2712

• Manufacturer: SEIBU KOKI

Swing on bed 890mm Cut-off top swing 1250mm Swing on the saddle 550mmSpindle speed: 0 to 350 rpm, 4 variable speedTotal length of bed 2740mm

150 Ton AIDA PRESS is availble for SALE

• Manufacturer: Aida
• Model: NC1-150

GAP FRAME, C type PRESSCapacity =149.686 t Stroke =199.9 mm Shut height =399.8 mm Bed W =759.46 mm Bed L =1,168.4 mm SPM =0 strokes/min. Air clutch (yes/no) =Yes Variable Speed = 0

2014 DMG MORI NVX 5080II/40 (No.NV502140107)

• Manufacturer: DMG森精機
• Model: NVX 5080 II

Travel X: 800 Y: 530 Z: 510 mm Distance from spindle end to nose: 150 to 660 mm In-machine coil conveyors (two, left and right) Scraper-type chip conveyor (left rear discharge) Tool length compensation and tool b...

2017 DMGMORI SEIKI NHX5000 2ndGe

• Manufacturer: DMG森精機
• Model: NHX 5000

Travel X : 730mm Y : 730mm Z: 880mm B : 0.001°. Scale feedback, X, Y, Z, 3 axes Touch sensor (spindle) Renishaw, for work Touch sensor (table) Renishaw, for tools Auto coupler (pallet supply) 2 hydraulic circuits...