Used variable speed in Mexico

EDGE SANDER

PART # 2AM-150 - EDGE SANDING MACHINE Voltage: Variable Speed: AC Inverter 400-1800 rpm

W 1824

Manually rotating saw head. Miter cut 0 ° - 60 ° (R ). Blade tension gauge. Hydraulic screw. Screw pressure regulator. Variable blade speed by inverter. Digital blade speed display. Arc height setter on control p...

ENDMATCHER MACHINE

ENDMATCHER MACHINE PART: 2CK-EM12 Is specially designed for machining tongue and groove (with or without bevels) on hardwood flooring and wall/ceiling paneling up to 12" wide. Its compact design with continuous t...

FRV-342 VERTICAL MILLING MACHINE NO.2 BRAND SUPERMAX

• Manufacturer: Supermax

Supermax (Tw) No.2 vertical milling machine model YC1-1/2VS, variable speed, 9" x 42" table, R8 taper, 3 HP motor, s/n. 128525

MSC-791 VERTICAL BAND SAW WITH DEGREE TILT, 18" THROAT, MAX. HEIGHT 20", MARVEL BRAND

• Manufacturer: Marvel
• Model: MSC791

Marvel (USA) Vertical band saw with inclination of degrees model 81, 18 "throat, max height 20", automatic feed, inclination to degrees, variable speed, motor 7.5 HP, s / n. 2040

MSC-808 DOUBLE POST HYDRAULIC AUTOMATIC BAND SAW, 20" X 24" CAPACITY, W.F. WELLS BRAND

• Manufacturer: W.F. Wells

W.F. WELLS (U.S.A.) Model R2024 Double Post Hydraulic Automatic Band Saw, 20" x 24" capacity, Variable Speed, with automatic feed, 24" max. feed, s/n. A1712

W 1832SR

• Gross weight: 2,489.993284 kilogram

Double cutting angle left 60° / right 45°. Hydraulic blade tension. Height adjusted by touch device. Variable blade speed by motor inverter. Two stroke hydraulic press. Manual screw movement. Press pressure regul...

MSC-773 VERTICAL BAND SAW, 36" THROAT, DOALL BRAND

• Manufacturer: DoAll
• Model: MSC-773

DOALL (E.U.A.) Saw vertical tape model V-36, 36 "throat, max height 9", table 30 "x 30", variable speed, 1.5 HP motor, s / n. 36463836

MULTIPLE SAW - DISCS DIAMETER 12

• Manufacturer: amxmachinery.com
• Phase type: Three-phase

PART: 2NT-NT-MRS12N - MULTIRIP SAW - DISCS DIAMETER 12" The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip s...

TRV-003 VERTICAL LATHE MODEL 48-VBM, 56" TURN CAPACITY, WITH 48" PLATE, SUMMIT BRAND

• Manufacturer: Summit
• Model: VBM

SUMMIT (Yugoslavia) Vertical lathe model 48-VBM, 56" turning capacity, with 48" chuck, Max. height under hmta: 1200mm, Variable Speed (0 - 250 RPM), motor 75 HP, s/n. 635

RML 1440VT

Motor power: 5 HP using a variable frequency inverter. DIGITAL DISPLAY: 20-400-2500 Infinitely variable speed range. Hardened and ground gears and beds. Solid cast bed along the entire length. Front tray for rapi...

CK-EM12 - NODDER - CONTINUOUS SPIGOT AND TENON FOR BOARDS AND FLOORS - 12" WIDE

PART: 2CK-EM12 - HEADERS - CONTINUOUS SPIGOT AND TENON FOR PLANKS AND FLOORING - 12" WIDE Is specially designed for hardwood flooring and wall/ceiling paneling up to 12" wide. Its compact design with continuous t...

MULTIPLE SAW - DISCS DIAMETER 14

• Manufacturer: amxmachinery.com
• Phase type: Three-phase

Features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with 14″ diameter rip saw blades and can be equipped with p...

W 2127SD

Saw height adjustment from the control panel. Double angle cutting left / right. Hydraulic blade tensioning device. Variable blade speed by motor inverter. Motor to clean the chips from the band saw. Manual screw...