Building Filters
- Trusted SellerAuction
2019 John Deere S760
- Manufacturer: John Deere
- Model: S760
- Horsepower: 333 horsepower
- Fuel type: diesel
2019 John Deere S760 combine Engine John Deere 6090HH029 Transmission ProDrive Operators station AC, Heat Display John Deere Auto steer Features Operator manual Single point header coupler Chaff spreader Straw ch...
- Trusted Seller
DOALL C-9AV #85373
- Manufacturer: DoAll
- Model: C-9AV
EQUIPPED WITH: UP TO 24" FEED SELECTOR CONVEYOR Variable band speed: 80-400 fpm, variable | Indexing vise automatic: 0-24" Max. | Motor/electrics: 3 hp, 220/440 V 3 phase
Ames, IA - Trusted Seller
LAPMASTER 15 #85573
- Manufacturer: Lapmaster
- Model: 15
No. of conditioning rings: 3 | Ring id: 5.5 inches | Plate diameter: 15 inches | Standard rpm: 60 RPM | Rpm range ( w/ variable speed drive: 0-60 | Drive motor - lapper: .5 HP | Drive motor - polisher: .75 HP | ...
Ames, IA - Trusted Seller
LAPMASTER 15 #85572
- Manufacturer: Lapmaster
- Model: 15
Equipped With: DIAMOND LAPMASTER DESPENSER SYSTEM No. of conditioning rings: 3 | Ring id: 5.5 inches | Plate diameter: 15 inches | Standard rpm: 60 RPM | Rpm range ( w/ variable speed drive: 0-60 | Drive motor - ...
Ames, IA - Trusted Seller
1966 Monarch 10" x 20" Super Precision Toolroom Lathe 10EE
- Manufacturer: Monarch
- Model: 10EE
Equipped with: 3 jaw chuck Taper attachment Maximum swing over bed: 12-1/2" | Distance between centers: 20" | Swing over cross slide: 7-1/4" | Spindle speeds: 25-1750 RPM | Spindle through hole: 1-13/32" | Tape...
- Trusted Seller
HYD-MECH S-20 SERIES II #86425
- Manufacturer: Hyd-Mech
- Model: S20
SPECIFICATIONS: CAPACITY BLADE WHEEL DIAMETER - 16 inch VARIABLE SPEED OPTION 3 HP HYDRAULIC OPTION 1/4 HP NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE
Ames, IA - Trusted Seller
1995 Clausing Colchester 21/32" x 84" Toolroom Lathe Mastiff VS
- Manufacturer: Clausing/Colchester
- Model: MASTIFF VS
Equipped with: 16” 6 jaw chuck w/5.5 hole x 7.5 deep Taper attachment Variable speed spindle Sony 2 axis DRO Coolant Chip pan Special Note: The bed has above normal wear. Tolerances are: 7” front of bed (f...
- Trusted Seller
BAILEIGH BS-360SA #84341
- Manufacturer: Baileigh
- Model: BS-360SA
EQUIPPED WITH: * Huge capacity of 14” round and 14” x 22” rectangle, 77 to 252 fpm variable blade speed, standard 1.25” blade (included) to make straight and accurate cuts, and a robust 5 hp motor that runs on 22...
Ames, IA - Trusted Seller
1995 HYD-MECH S20 #86285
- Manufacturer: Hyd-Mech
- Model: S20
SPECIFICATIONS: BLADE SPEED (STANDARD STEP PULLEY) --90/140/220/310 SURFACE FEET/MINUTE NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR
Ames, IA - Trusted Seller
HYD-MECH S20 #86633
- Manufacturer: Hyd-Mech
- Model: S20
PREOWNED HYD-MECH MITER HORIZONTAL BAND SAW PREOWNED HYD-MECH MITER HORIZONTAL BAND SAW is designed for efficient and reliable cutting in various industrial applications. SPECIFICATIONS: BLADE SPEED (STANDARD STE...
Ames, IA - Trusted Seller
HEMSAW H130A #85633
- Manufacturer: Hemsaw
EQUIPPED WITH: Operator Control: Smart Saw® Control Console is located on front of saw, with 9" Omron touch screen controls, for operator convenience. Saw may be operated in manual, semi-automatic or fully-automa...
Ames, IA - Trusted Seller
ELLIS 9400 #86228
- Manufacturer: Ellis
- Model: 9400
SPECIFICATIONS: FEATURES: - POWER DOWN FEED - VARIABLE SPEED FROM 0-1200 RPM - ADJUST SPEEDS WHILE OPERATING IN THE MATERIAL - HIGH TORQUE AT LOW RPM SPEEDS - INSTANTANEOUS REVERSING FOR TAPPING - TAPPING HEAD IS...
Ames, IA - Trusted Seller
1994 HEMSAW V150A SS #82836
- Manufacturer: Hemsaw
SPECIFICATIONS: 20 in HORIZONTAL, 18 in VERTICAL @ 45 DEGREES VARIABLE CONTROLLER: Machine is equipped with a variable controller for the drive unit. Please specify 220V OR 440V electrics. This is not a dual volt...
Ames, IA - Trusted Seller
JET JDP-20VS-1 #85660
- Manufacturer: JET
- Model: JDP-20VS-1
- Drilling diameter: 28.575 millimeter
DETAILS: Solid design and construction deliver precision operation and control. JET 20” Variable Speed Drill Presses combine variable speed spindles with a massively constructed head that increases accuracy and r...
Ames, IA - Trusted Seller
ELLIS 9400 #82634
- Manufacturer: Ellis
- Model: 9400
SPECIFICATIONS: FEATURES: - POWER DOWN FEED - VARIABLE SPEED FROM 0-1200 RPM - ADJUST SPEEDS WHILE OPERATING IN THE MATERIAL - HIGH TORQUE AT LOW RPM SPEEDS - INSTANTANEOUS REVERSING FOR TAPPING - TAPPING HEAD IS...
Ames, IA