Used variable speed in Friuli Venezia Giulia, Italy

1998 Milling machine for chair production

• Manufacturer: C.A.M.A.M.

Equipment: Horizontal milling motor power: 3 kW | Variable speed drive: 0.37 kW | Bildrechte: Woodmercator |

2011 Bütfering SKO 113 C

• Manufacturer: Butfering
• Model: SKO 113 C

COMPOSITION: Working width: 1350 mm | Sanding belt width: 1370 mm | Sanding belt length: 1900 mm | Steel roller: Ø 150 mm | Working thickness: max. 150 mm | Total installed power: 10 HP | Variable speed drive: 0....

1998 Oscillating mortiser

• Manufacturer: Camam

Number of spindles: 06 | Speed: 10.000 rpm variable | Max. machining depth: 50 mm | Bending radius of work table min - max: 300 - 900 | Bildrechte: Woodmercator |

2002 COSMIC SMALL CIRCULAR SAW MULTIPLE BLADE COSMEC MODEL SMB 200

• Manufacturer: Cosmec

COSMEC 2-ARM TWO-HEAD MULTI-BLADE CIRCULAR SAW MODEL SMB200 USED Maximum cutting height mm. 200 Belt width mm. 400 Feed speed variable m/min 5/30 Main motor power KW 2 x 45 Saw arbor diameter mm. 70 Serial ...

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING SLATS MOD. TS400

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING LAMELLAS MOD. TS400 Double speed device: thanks to a reading sensor the machine starts cutting at a reduced speed to accelerate after the blade enters the plank, this lea...

2000 BACCI TWIN MX 6CN MACHINING CENTER - CE COMPLIANT

• Manufacturer: Bacci
• Model: MX

WORKING CENTER BACCI TWIN - TO CE STANDARDS - USED COMPLETE WITH: Working range X 3400 mm Working range Y 1800 mm Working range Z 1250 mm B unlimited C 400° Head type 4 (Kw 7.5 each) Speed of rotation max 24,000 ...

FRIULIAN VENTILATION FILTERING SUBSTATION - 15 KW

FRIULIAN VENTILATION FILTERING SUBSTATION - KW 15 - USED NO. 72 cotton canvas filter sleeves ** with dimensions: fi 200mm - h 2000 mm Maximum FILTERING capacity of the filter 13,000 m3/hour material galvanized sh...

2008 Tenoning - profiling production line

• Manufacturer: S.V. Service

First zone - TABLE WITH CONVEYOR BELT Workplate with 2600 mm table equipped of motorized belt conveyor / pieces introduction with speed variation through Inverter unit. Second zone - STATIONARY MANUFACTURIN...

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING SLATS SAWYER MOD. TS 650 CE 40+3+2HP THREE-PHASE

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING LAMELLAS SAWYER MOD. TS 650 CE 40+3+2HP THREE-PHASE Max. cutting capacity 650x200 mm Blade-belt distance 2-150 mm Min. cutting thickness 2 mm Flywheel diam. 915 mm. Blade...

2022 HORIZONTAL BANDSAW AUTOMATIC FOR SLICE CUTTING MODEL TS400 – CE CERTIFIED

HORIZONTAL BANDSAW AUTOMATIC FOR SLICE CUTTING MODEL TS400 – CE CERTIFIED - USED Dual-speed device Maximum cutting capacity 420x200 mm. Table blade distance 2-150 mm. Minimum cutting thickness from top 0.75 m...