Used variable speed in Australia

Jacketed Mixer

Stainless Steel Jacketed 500Litre Mixer Hydraulic raise and lower Internal agitator 415V with variable speed drive Jacketed Mixing Bowl Manual bowl tilting and also fitted with a bottom drain. This machine has ne...

Hopper Feeder (BT106)

Hopper Feeder approx 3m3 capacity. 750mm belt width, 7.5kw drive, belt speed approx 1.2m/s. Variable angle grizzly, detachable skid base. Slide gate discharge. DOM 2018 Approx 4.1m x 2.2m for transport.

INSULATED HEATED TANK WITH AGITATOR MIXER 180L

• Manufacturer: INSULATED HEATED TANK WITH AGITATOR MIXER

This tank is in great condition. It was previously use to melt wax and soap. The tank is insulated and has heating via electric elements. There is also a temperature probe for monitoring. It also has a agitator b...

Jones & Shipman 1300

• Manufacturer: Jones & Shipman
• Model: 1300

Jones & Shipman 1300 universal cylindrical grinder 254mm max dia x 686mm centres, table traverse 76-3658mm/min, table swivel 16 degrees, work head variable speed, coolant system. machine weight 1950kg

Universal Cylindrical Grinder

Jones & Shipman 1300 universal cylindrical grinder 254mm max dia x 686mm centres, table traverse 76-3658mm/min, table swivel 16 degrees, work head variable speed, coolant system. machine weight 1950kg

Turret Milling Machine

HAFCO BM-50VE milling machine 40int spindle, variable speed 70-4000rpm 5hp 415volt, power feed to X axis, rapid to Z axis travels X-900mm, Y-370mm, Z-450mm Machine weight approx 1350kg

COMMERCIAL PRODUCTION AUGER DEEP FRYER

• Manufacturer: COMMERCIAL

This fryer is in good working condition. Runs off natural gas. It's a deep fryer for production, the contents start from one end of the screw and fries until it gets to the other end which has a scoop to pull the...

Roll Press

Roll Press (briquetting ) Twin Rolls 65mm x 400 diam (Cooling Jacketed) forming a 25mm diameter tablet. Drive 5hp Variable speed 415v. Cooling Pump 1/2hp motor. Originally supplied for R&D for Food company by Eas...

STAINLESS STEEL MOTORISED HOLDING CONVEYOR

• Manufacturer: STAINLESS STEEL

This conveyor is in great working condition. It runs off 3 phase power. It is made out of stainless steel. There are multiple conveyors, one main belt, one small secondary belt that travels the opposite direction...

APV Products HP/Industry 16.51H

• Manufacturer: APV Products

YOM: 1993 Was last used for Photographic Emulsion Capacity: 300-400 L/Hr Inlet Pressure: 3-10 Bar (low speed viscosity-high speed viscosity) Max Pump Pressure: 800 bar Cooling Water Volume: Eccentric Oil 90 l/hr ...

Turret Milling Machine

Metalmaster BM-40V 30 iso spindle, speeds variable 70-3500rpm, table 1370mm x 254mm, travels – X 860mm, Y 360mm, Z425mm. Feed and rapid to X axis, 3 axis DRO, 3hp 415 volt. Weight 1300kg Various tooling, tidy mac...

TurboChef 20" High Conveyor Oven HHC

• Manufacturer: Turbochef

7” intuitive capacitive touch screen with one-touch controls and icons, featuring durable tempered glass Variable-speed recirculating air impingement system and variable-speed blower motors Idle mode for energy c...

OAKES TYPE AERATOR MIXER Mixers General

• Manufacturer: OAKES TYPE AERATOR MIXER

Oakes type mixer with monopump This is one of several ""Oakes type"" mixer-aerators we now have in stock Oakes type mixer, Head OD appr 140 mm stainless steel construction 25 mm inlet and outlet Ccomplete with El...