Building Filters
- Trusted Seller
CONTROL LEVER “SCHAUBLIN” for top slide
- Manufacturer: Schaublin
pour coulisseau supérieur du chariot Weight: 1.25 kg
Biel/Bienne, Switzerland - Trusted Seller
LEVER OPERATED CARRIAGE “SCHAUBLIN” 102-47 COMBINED
- Manufacturer: Schaublin
top slide with screw Weight: 11 kg
Biel/Bienne, Switzerland - Trusted Seller
EXCENTRIC PRESS “BEUTLER” D8-200
- Manufacturer: Beutler
Manufacturing origin Swiss Voltage 380/50/3 Netweight with motor, without pillar 245-295 kg Netweight of standard pillar 95 kg Custom position 8462.9930 TYPE D-8 / D8-200 Pressure exerted (maximum) 8 to...
Biel/Bienne, Switzerland - Trusted Seller
EXCENTRIC PRESS “BEUTLER” D8-200
- Manufacturer: Beutler
Manufacturing origin Swiss Voltage 380/50/3 Netweight with motor, without pillar 245-295 kg Netweight of standard pillar 95 kg Custom position 8462.9930 TYPE D-8 / D8-200 Pressure exerted (maximum) 8 to...
Biel/Bienne, Switzerland - Trusted Seller
EXCENTRIC PRESS “BEUTLER” D8-200
- Manufacturer: Beutler
Manufacturing origin Swiss Voltage 380/50/3 Netweight with motor, without pillar 245-295 kg Netweight of standard pillar 95 kg Custom position 8462.9930 TYPE D-8 / D8-200 Pressure exerted (maximum) 8 to...
Biel/Bienne, Switzerland - Trusted Seller
EXCENTRIC PRESS “BEUTLER” D8-200
- Manufacturer: Beutler
Manufacturing origin Swiss Voltage 380/50/3 Netweight with motor, without pillar 245-295 kg Netweight of standard pillar 95 kg Custom position 8462.9930 TYPE D-8 / D8-200 Pressure exerted (maximum) 8 to...
Biel/Bienne, Switzerland - Trusted Seller
1990 HEMA UH504
- Manufacturer: Hema
- Model: UH504
Engine brake Special features: - APA2 guide top and bottom NEW - Wheels 2022 renewed! - on the machine was cut only paper and cardboard therefore no mechanical load! - additional suction device in the table! - ma...
Baienfurt, Germany - Trusted Seller
2013 Cycle-controlled lathe WEILER E 40
- Manufacturer: Weiler
- Model: E40
- Spindle bore: 66 millimeter
With Siemens Sinumerik cycle control WEILER 840 D /SL 1 With the following accessories: Sliding guard with interior lighting Multifix tool holder with 8 pcs. inserts 8-position SAUTER turret with AGW and tool dri...
Aach, Germany - Trusted Seller
1968 PLATARG 912 Ref No: 43817
- Manufacturer: PLATARG
Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top ...
Niederhelfenschwil, Switzerland - Trusted Seller
WATERBURY FARRELL 015-012 Ref No: 55436
- Manufacturer: Waterbury Farrel
4 1/4" CAM SHAFT TOTAL STROKE - MEASURED TO BE 4.25. AIR CLUTCH AND BRAKE - MINSTER NEW SIDE SHAFT INCLUDING BUSINGS NEW PINION GEARS- NEW, TOP AND BOTTOM (ALL 4) NEW TRANSFER MECHANISM - DOVE TAIL SLIDE AND BRO...
Niederhelfenschwil, Switzerland - Trusted Seller
Nanxing NCB 612 DXT
- Manufacturer: Nanxing
Compact, high-tech machine that allows you to make holes on the 6 sides of the panel. The machine is configured with 2 operating units, lower and upper. Our drilling machine can work on panels simultaneously both...
Sesto Calende, Italy - Trusted Seller
WATERBURY FARRELL 010-012 Ref No: 55440
- Manufacturer: WATERBURY FARRELL
Waterbury Farrel 1012 ICOP Transfer Press Refurbished w Minster Clutch Mint! * Most Everything Refurbished! We can do more if you want more done. * Plungers and Caps Scrapped back into Perfection * Roller Boxes d...
Niederhelfenschwil, Switzerland - Trusted Seller
1998 HYDRAP HPDK 100 Ref No: 55217
- Manufacturer: HYDRAP
machine in top condition Object: 55217 | Drive system: hydraulic | Openings in uprights: yes | Table cushion: yes | Total force (nominal): 100 to | Table surface (left-right): 700 mm | Table surface (front-back...
Niederhelfenschwil, Switzerland - Trusted Seller
VERTICAL MIXERS from 5 to 30 m3
- Manufacturer: Germanplast
Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot. Please see our attached [PDF](https://drive.google.com/file/d/1kQKOuxvrbrpfS...
Issogne, Italy - Trusted Seller
CONVENTIONAL LATHE “PINACHO” ML-18 250-58X1500 MM
- Manufacturer: Pinacho
- Model: ML18
Spindle brake Main spindle reducing bush and fixed centre Tailstock reducing bush and fixed centre Square toolpost and key Chip collecting tray Instruction manual Centralized lubrication Coolant equipment Reducin...
Biel/Bienne, Switzerland