Used threading and tapping

USED-LYNDEX 05005-0875 CAT 50 COMPRESSION TAPPING HEAD

• Manufacturer: Lyndex

USED-LYNDEX 05005-0875 CAT 50 COMPRESSION TAPPING HEAD. LOT# 3370 STK# 104566 ================================ BUYER PAYS FOR SHIPPING EXPENSE WE SHIP M-F BY USPS/UPS/FEDEX. USING THE LEAST EXPENSIVE METHOD O...

USED-SANDVIK 50MM-VF-12542 CAT 50 COLLET CHUCK TAPPING HEAD

• Manufacturer: Sandvik

USED-SANDVIK 50MM-VF-12542 CAT 50 COLLET CHUCK TAPPING HEAD LOT# 3276 STK# 104454 ================================ BUYER PAYS FOR SHIPPING EXPENSE WE SHIP M-F BY USPS/UPS/FEDEX. USING THE LEAST EXPENSIVE METH...

USED-BALAS 50MM-VF 12541-1 CAT 50 TAPPING COLLET CHUCK

• Manufacturer: Caterpillar

USED-BALAS 50MM-VF 12541-1 CAT 50 TAPPING COLLET CHUCK LOT# 3300 STK#104478 ================================ BUYER PAYS FOR SHIPPING EXPENSE WE SHIP M-F BY USPS/UPS/FEDEX. USING THE LEAST EXPENSIVE METHOD OR ...

Roemheld 1346165 Threaded Universal Cylinder

• Manufacturer: Roemheld

4" LANDIS ”4” STATIONARY DIE-HEAD PIPE THREADER w/LANDIS 6-CHASER DIE-HEAD - FRONT & REAR CHUCKS - REAMER & CUT-OFF

• Manufacturer: Landis

4" LANDIS STATIONARY DIE-HEAD PIPE THREADER SERIAL NO. 4-370-4, MODEL 4 Imperial Metric EQUIPPED WITH: (1) 4" LANDIS 6-CHASER DIE-HEAD 3-JAW FRONT AND 3-JAW REAR CHUCKS HIGH SPEED REAMER & CUT-OFF COOLANT SYSTEM ...

2" OSTER "502 PIPE MASTER" PORTABLE PIPE THREADER w/BUILT-IN DIE HEAD - CART

2" OSTER "502" PORTABLE Imperial Metric REVOLVING DIE HEAD PIPE & BOLT THREADER Serial No EX374, Model 502, Series "PIPE MASTER." EQUIPPED WITH: Built-In Die-Head Cart - Some Spare Parts CATALOG SPECIFICATIONS: B...

WATERBURY FARREL MODEL 10 #1223624

• Manufacturer: Waterbury Farrel

ROTOVANE HOPPER Thread diameter: 5/32" | Thread and shank length: 1-1/2" | Ppm: 175

WATERBURY FARREL MODEL 10 #1223524

• Manufacturer: Waterbury Farrel

ROTOVANE HOPPER Thread diameter: 1/4" | Thread and shank length: 2" | Ppm: 150

Enco Tapping Machine

• Manufacturer: Enco

Enco Tapping Machine Enco Tapping Machine

2000 MIYANO MTV-C410

• Manufacturer: Miyano

Drilling & Tapping Center, used but packed with features. Specs: X/Y/Z: 15.76"/11.82"/11.82", 8,000 rpm spindle, 10-station tool changer. Equipped with rigid tapping, coolant system, and 42 BT 40 tool holders. Ma...

2021 SEIKI KT-420L

• Manufacturer: Seiki

Used Drilling & Tapping Center: Features 27.6" X, 16.5" Y, 11.8" Z axes, 15,000 RPM, 31.5" x 15.7" table. Equipped with Mitsubishi M80A control, 21 ATC, chip conveyor, Renishaw probe, rigid tapping, and coolant p...

USED-SANDVIK VARILOCK 391.80-0150 100 TAPPING ADAPTER ON SANDVIK CAT 50 A 390.45-50 50 040M

• Manufacturer: Fanuc

USED-SANDVIK VARILOCK 391.80-0150 100 TAPPING ADAPTER ON SANDVIK CAT 50 A390.45-50 50 040M LOT 3235 STK 104415 ================================ BUYER PAYS FOR SHIPPING EXPENSE WE SHIP M-F BY USPS/UPS/FEDEX. U...