Used thread rollers in Netherlands

Ferdinant Bauer thread roller

• Manufacturer: Ferdinant Bauer

Ferdinant Bauer thread roller

• Manufacturer: Ferdinant Bauer

Tooling: 80 mm | Can shape: round

Ferdinant Bauer thread roller

• Manufacturer: Ferdinant Bauer

Tooling: 80 mm | Can shape: round

Threadroller of German origin thread roller

• Manufacturer: Threadroller of German origin

Tooling: 80 mm | Can shape: round

Threadroller of German origin thread roller

• Manufacturer: Threadroller of German origin

Tooling: 90 mm | Can shape: round

Kircheis Krupp GDNI

• Manufacturer: Krupp

Can height max.: 50 mm | Can / ends diameter minimum: 12 mm | Can / ends diameter maximum: 100 mm | Can shape: round | Speed (up to): 4500 caps per minute

Kircheis Krupp GDNI

• Manufacturer: Krupp

Can height max.: 50 mm | Can / ends diameter minimum: 12 mm | Can / ends diameter maximum: 100 mm | Can shape: round | Speed (up to): 4500 caps per minute

Brankamp PK 6000

• Manufacturer: Brankamp

Quality pre-owned inline split rivet tester. General: Process Monitoring on presses, stamping machines and thread rollers.

Rogi WM210V BRUSHLESS lathe

• Manufacturer: Rogi
• Spindle bore: 21 mm

Two speed bands allow maximum torque in the lower speed Infinitely variable from 50-2500 rpm Double vee bedway - hardened and ground Adjustable gibs to slideways Off set facility to tailstock Tailstock quill engr...

Rogi WM180V BRUSHLESS lathe

• Manufacturer: Rogi
• Spindle bore: 21 mm

Two speed bands allow maximum torque in the lower speeds Infinitely variable from 0-2500 rpm Double vee bedway - hardened and ground Adjustable gibs to slideways Off set facility to tailstock Tailstock quill engr...

1984 KUPER FW/Q 1800 CROSS FEED SPLICER [VE-010482]

• Manufacturer: Kuper
• Model: FW

KUPER FW/Q 1800 Lengthwise (Crossfeed) with Zigzag and with PVAC glue Splicer. Features: -- "Dual" gluing system, joins veneer edges passing through a "PVAC disk style" glue application zone at high speed and app...

Rogi WM360Ax1000 lathe

• Manufacturer: Rogi
• Spindle bore: 40 mm

Induction hardened, precision ground V-way bed D1-4 spindle supported by high quality taper roller bearing Hardened, precision ground gears in headstock High precision directly mounting chuck Removable gap bed en...

Rogi WM360x1000 lathe

• Manufacturer: Rogi
• Spindle bore: 38 mm

Induction hardened, precision ground V-way bed D1-4 spindle supported by high quality taper roller bearing Hardened, precision ground gears in headstock High precision directly mounting chuck Removable gap bed en...

Rogi WM460Ax1000 lathe

• Manufacturer: Rogi
• Spindle bore: 80 mm

Chrome molybdenum headstock gears, hardened and ground Large diameter D1-8 spindle is supported by two high quality taper roller bearings and one ball bearing 80 mm spindle hole Smooth running Solid, extremely hi...

Rogi WF250V-Fx750 DIG INVERTER lathe

• Manufacturer: Rogi
• Spindle bore: 26 mm

Delta inverter drive with AC motor Infinitely variable speed from 30 - 2200 rpm Double vee bedway - hardened and ground Adjustable gibs to slideways Offset facility to tailstock Tailstock quill engraved metric an...