Building Filters
- Trusted Seller
2015 Vision Wide Tech Co., Ltd SF-4120
- Manufacturer: Vision Wide Tech Co., Ltd
The SF 4120 portal center is in good technical condition with a movable table and a fixed portal stand. Heidenhain iTNC 530 control system. The SF machine meets high requirements for mould surface machining, edge...
Prague, Czech Republic - Trusted Seller
2013 Plasma-Tech PTL 4001 1500/3000
- Manufacturer: Plasma-Tech
- Cutting thickness: 12 mm
The machine is in good technical condition, currently stored in a disassembled state. CNC system ACS SAR-4-E-M0 (3 axes).
Brno, Czech Republic - Trusted Seller
2011 HANWHA TECH TechM XD20H
- Manufacturer: Hanwha
The machine is in good technical condition, under power, after agreement is possible to test it. Driven mounts 4 and 2 (counterspindle) Feeder for material up to 3000 mm long.
Brno, Czech Republic - Trusted Seller
2010 BC ECO TECH KTVF 55x3/1500
- Manufacturer: BC ECO TECH
Efficiency: 200 kg/h | Maximum number of foil layers: 3
Brno, Czech Republic - Trusted Seller
2005 Engel VC 500/110 TECH
- Manufacturer: Engel
Clamping force: 110 t | Machine length: 4860 mm | Machine width: 1380 mm | Machine height: 2050 mm | Weight of the injection molding machine: 7400 kg
Brno, Czech Republic - Trusted Seller
2007 Engel VC 80/25 TECH
- Manufacturer: Engel
Clamping force: 25 t | Plate dimensions: 470 x 280 mm | Closing force: 250 kN | Screw diameter: 22 mm | Machine length: 2720 mm | Machine width: 1030 mm | Machine height: 1760 mm | Weight of the injection moldi...
Brno, Czech Republic - Trusted Seller
CNC turning and milling complex lathe QUICKTECH i-60 Ultimate
- Manufacturer: Quick-Tech
- Spindle bore: 31 mm
Machine type: I-60U | Mitsubishi controller: M830S | Spindle capacity: Max. Turning Dia. | Max. bar working dia.: 30mm | Max. turning length: 100mm | Collet chuck type: KK5-173E42B | Spindle nose: A2-5 | Spindle...
Prague, Czech Republic H.M.Transtech MPS 2000/3
- Manufacturer: Trans Tech
Cutting length: 2050 mm Material thickness: 3 mm Power of the main electric motor: 4 kW Rear stop: 600 mm Cutting angle: 2.0 ° Dimensions (w x h x d): 2580×1200×2090 mm Machine weight: 1540 kg Machine in good tec...
Sedliště, Czech Republic2008 H.M. Transtech TSM 25/25 H
- Manufacturer: Trans Tech
Working length [mm]: : 2520 mm Max. Mr. sheet steel 400N/mm2 [mm]: : 2.50 mm Max. Mr. stainless steel sheet 600N/mm2 [mm]: : 1.50 mm Max. Mr. sheet aluminum 275N/mm2 [mm]: : 3.5 mm Opening segments/bar [mm]: : 90...
Sedliště, Czech Republic- Trusted Seller
2019 FORMAT4 HVP Typ 4
- Manufacturer: FORMAT4
This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², ma...
Czechia - Trusted Seller
2008 Matsuura H.Plus-405
- Manufacturer: Matsuura
- Model: H.Plus 405
- Spindle taper: HSK 63
control system: Matsuura G tech 30i Clamping area of table: 500x500 mm | Travel x-axis: 660 mm | Travel y-axis: 660 mm | Travel z-axis: 660 mm | Spindle speed: 10 - 12000 /min. | Number of driven axes: 4 | Coolin...
Brno, Czech Republic Považské strojárně BRH 20
- Manufacturer: Považské strojárně
Max. grinding width : 230 mm Max. grinding length : 630 mm The machine is in a good tech. condition.
Sedliště, Czech RepublicStanko 3E711B
- Manufacturer: Stanko
- Model: 3E711B
X-axis: 500 mm Y axis: 250 mm Machine is in good tech. condition, after agreement possible to see and test. grinding tolerance +/- 0.01 mm
Sedliště, Czech RepublicTOS FO 16
- Manufacturer: TOS
- Model: FO 16
Max. diameter of milled wheel : 1600 mm Max. milled module : 16 CZ The machine is in good technical condition EN Machine is in good tech. condition.
Sedliště, Czech RepublicTOS Varnsdorf WH 63
- Manufacturer: TOS Varnsdorf
- Model: WH 63
Working spindle diameter: 63 mm Transverse adjustment of the table: 1000 mm CZ Machine in good technical condition, connected, inspection possible. EN Machine in good tech. condition, under power, possible to see.
Sedliště, Czech Republic
