Building Filters
- Trusted Seller
2014 SINTO SURFACE TREATMENT 5 WHEEL SPINNER HANGER SHOT BLAST
used
- Manufacturer: Spinner
2014 Sinto Surface Treatment Spinner Hanger Shot Blast Machine, (5) FIVE 20 HP Blast Wheels, Maximum Piece Weight 5,000 Lbs Maximum Piece Size 70" Diameter X 96" Height Model SZAR1, With Langtry 25 HP Canister Du...
Stow, OH - Trusted Seller
SIMCO TG-3 Ionizing Air Gun USED
used
- Manufacturer: Simco
Input: 100 VAC, 50/60 Hz, 0.36/0.34 Amp Output: 5.35 kVAC SC: 5mA Max 7 Bar Max Pressure 40°C Max Temperature Removed from: Meiki Injection Molding Machine Model: MDMI VT-1000IID Control Expedited shippi...
$181 USDHolly, MI - Trusted Seller
METAL FABRICATOR 3 Zone Hot Runner USED
used
- Manufacturer: METAL FABRICATOR
3 Zone with (3) Used XIN LEI Hot Runner Cards Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purc...
$499 USDHolly, MI - Trusted Seller
WATLOW HEAT ELEMENT U6-29-123-2 Used
used
- Manufacturer: WATLOW
240V 9KW 3PHY Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This piece is located at...
$62 USDHolly, MI - Trusted Seller
TEMPCO TNP01173 HEAT ELEMENT USED
used
- Manufacturer: TEMPCO
2.5 kW 240 Volt 3 Phase D 17 24 Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This ...
$140 USDHolly, MI - Trusted Seller
WATLOW HEAT ELEMENT U6-29-123-2 Used
used
- Manufacturer: WATLOW
240V 9KW 3PHY Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This piece is located at...
$62 USDHolly, MI - Trusted Seller
TEMPCO TPN01172 Heat Element USED
used
- Manufacturer: TEMPCO
M 19 11 12 kW 460 Volt 3 Phase Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This p...
$140 USDHolly, MI - Trusted Seller
MicroTech Solvent Wet Bench
used
MicroTech Solvent Wet Bench consisting of:- 2 IPA Tanks- 2 Process Tanks - Megasonic Tank w/ Recirculation - Ultrasonic Tank w/ Recirculation- Capable of Processing 6 & 8" Wafers- Robotic Handling- Vintage: Appro...
Decatur, GA - Trusted Seller
Plasmatherm Odyssey Asher
used
- Manufacturer: Plasma-Therm
PLASMATHERM ODYSSEY HDRF ASHER consisting of:- Model: Odyssey HDRF- Configured for 150mm wafers- 2 Chambers- Vintage: Approximately 2019- Used Minimally for R&D & Light ProductionConfigured with Gases:- O2- O2- C...
Decatur, GA - Trusted Seller
Plasmatherm SLR-720 RIE System
used
- Manufacturer: Plasma-Therm
- Model: SLR-720
PLASMATHERM SLR-720 RIE consisting of:- Model: SLR-720- Single chamber with load lock- Currently configured for 4" wafers - Can process up to 8"/200mm wafers (with proper tooling, available at additional cost) - ...
Decatur, GA - Trusted Seller
Oxford PlasmaPro NGP1000 ICP 380
used
- Manufacturer: Oxford
- Model: PlasmaPro NGP1000
OXFORD PLASMAPRO NGP1000 ICP 380 ETCHER consisting of: - Model: Oxford PlasmaPro NGP1000 ICP380 ETCHER- Load Locked Chamber - 490mm Diameter Aluminum Lower Electrode- Capable of running up 450mm wafers- System P...
Decatur, GA - Trusted Seller
Oxford Plasmalab 100 ICP System
used
- Manufacturer: Oxford
- Model: PlasmaLab 100
OXFORD PLASMALAB 100 ICP ETCHER consisting of:- Model: Plasmalab 100 ICP- Inductive Coupled Plasma Source (ICP380)- Max wafer size: 8"/200m diameter (8" platen)- X-20 PLC Controller- New Windows 10 PC- Cryo Table...
Decatur, GA - Trusted Seller
Yield Engineering YES 58 HMDS Vapor Prime Oven
used
- Manufacturer: Yield Engineering
- Model: YES-58
YIELD ENGINEERING YES 58 HMDS VAPOR PRIME OVEN consisting of:- Model: YES 58- Dual Function (Prime / Reversal)- Up to 200 Degrees Celsius - Chamber Dimensions 16” x 16” x 16”- One Shelf - 1700W Heater- Temperatur...
Decatur, GA - Trusted Seller
Tepla 600 Semi-Automatic Plasma Asher
used
- Manufacturer: TePla
- Model: 600
TEPLA 600 PLASMA ASHER consisting of: - Model: 600 SemiAuto- Semi-Automatic RF Plasma System - Can process up to 150mm wafers- Used for photoresist stripping and surface cleaning, as well as etching silicon and i...
Decatur, GA - Trusted Seller
Oxford PlasmaPro NGP1000 PECVD
used
- Manufacturer: Oxford
- Model: PlasmaPro NGP1000
OXFORD PLASMAPRO NGP1000 PECVD SYSTEM consisting of:- Model: Oxford PlasmaPro NGP1000 PECVD- Load Locked Chamber - System PC, Keyboard, Mouse- Windows 7 w/ PC4500 Control Software- X20 PLC- 490mm Diameter Aluminu...
Decatur, GA 
TePla 300 Surface Treatment / Cleaning
used
- Manufacturer: TePla
- Model: 300
Good condition TePla 300 Surface Treatment / Cleanings available between 2006 and 2007 years. Located in USA and other countries. Click request price for more information.
USA