Used stacker in Konin, Poland

Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker (A3773)

• Manufacturer: Guzzetti (Italy)

Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in ve...

СTL line Spotti 1550x6x25t (flying shear, two levelers)

• Manufacturer: Spotti/LDM

СTL line Spotti 1550x6x25t is used for coil metal processing with 6mm maximum metal thickness. Line is equipped with two levelers and flying shear Line consist of uncoiler, two levelers, flying shear, stacker

Spotti СTL line 1550x6x25t (flying shear, two levelers)

• Manufacturer: Spotti

СTL line Spotti 1550x6x25t (flying shear, two levelers) Make: Spotti/LDM Year: 2000 Maximum coil width: 1550mm Maximum metal thickness: 6mm Maximum coil weight: 25t Line consist of uncoiler, two levelers, f...

60″ x .135″ x 20,000Lb Dahlstrom CTL Line

• Manufacturer: Dahlstrom

Cut to length line for sheet metal processing Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Ro...

Cut-to-Length

• Manufacturer: Cut-to-Length

Infeed parts cut-to-length complete line the system is equipped with an S5 controller, which is also used to control a stacker with an outlet section. Stacking at the including roller and chain tables, The compon...

Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770)

• Manufacturer: Delta

Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb is machine for cut to length cutting operations of coil metal with maximum 72″ width and up to 0.5″ thickness. Machine can handle maximum 60,000LB coils. Delta-Alc...

Dahlstrom CTL Line 60″ x .135″ x 20,000Lb

• Manufacturer: Dahlstrom

Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll...

Rowe – Voss Cut to length line 48″ x .076″ x 20,000Lb

• Manufacturer: Rowe

Cut to length line 48″ x .076″ x 20,000Lb Rowe – Voss Make: Rowe – Voss Material Width: 12″ – 48″ Material Thickness: .017″ – .076″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Entry V-Type Coil Car Ma...

Cut to length line Redman 2000mm x 13mm x 20 ton

• Manufacturer: Redman (UK)

Cut to length line Redman 2000mm x 13mm x 20 ton is used for coil metal cutting operations Entry V-Type Coil Car Double Mandrel Uncoiler Hold-Down Roll Hydraulic Peeling Table Driven Pinch Rolls Corrective 4-Hi L...

1972 Redman Cut to length line 6-13 mm/ 600-2000 / 20 t

• Manufacturer: Redman

Make: Redman (UK) Material Width: 600mm – 2000mm Material Thickness: 6mm – 13mm Coil Weight: 20 ton Coil ID: 460mm – 760mm Coil OD: 1800mm Max Speed: 20 meters per minute Production Mode: Stop / Start Dir...

Cut-to-length line FIMI 2000x8mm x30t (A3769)

• Manufacturer: FIMI

Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to pr...

Cut-to-length line Bronx 2050x8mm x35t (A3781)

Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double St...

72″ x .075″ x 40000Lb Rowe / Herr Voss CTL Line

• Manufacturer: Herr Voss

used cut to length line for sheet metal processing 72″ x .075″ x 40,000Lb Rowe / Herr Voss CTL Line Entry Coil Car Floor Standing V-Type Design Powered Lift & Traverse Control Panel Mandrel Uncoiler 4-Leaf Mandre...