Used software in Geneva, Switzerland

1986 PFAUTER PE150

• Manufacturer: Gleason-Pfauter
• Model: PE150
• Gear width: 150 millimeter
• Wheel diameter: 150 millimeter

Completely rebuilt 2007: New motors, drives, NUM - Numerical Controlled Gear Software | Cnc: NUM | Max. wheel diameter: 150 mm | Diameter table: 160 mm | Gear width: 150 mm | Max module: 3 | Max. tool length: 22...

2008 STUDER S33

• Manufacturer: Studer
• Model: S33

STUDER S33 CNC cylindrical grinding machine EQUIPMENT INCLUDED: x1 internal mechanical grinding spindle type 102560B - speed: 60,000 [rpm] x1 hydraulically folding dressing device x1 fixed dressing unit mount...

2004 SMP NUMAFUT CA3+

• Manufacturer: SMP NUMAFUT

WORKHEAD (A-AXIS) WHEELHEAD (B-AXIS) WHEEL MAGAZINE TOOL MAGAZINE ELECTRICS DIMENSIONS - Spindle cooling unit * with retractable nozzle - Airblow upon tool - Fire estinguisher (to be checked buy the buyer through...

2006 STUDER S33

• Manufacturer: Studer
• Model: S33

STUDER S33 CNC cylindrical grinding machine EQUIPMENT INCLUDED: x1 mechanical internal grinding spindle type 102540B - speed: 40,000 [rpm] x1 hydraulically folding dressing device x1 dressing turbine (wheel) ...

2003 WALTER Helitronic Power Production

• Manufacturer: Walter
• Model: Helitronic Power

CNC sharpening machine - WALTER Helitronic Power Production EQUIPMENT INCLUDED: x1 TRANSOR 12290-800A filtration unit x1 MTA oil cooler type TAE 015 x1 DSL oil mist suction unit type AES-GAMMA 30 x1 RENISHAW...

2015 FISCHER GEORG +GF+ LASER P 600 5AX

• Manufacturer: Fischer

Software : Control: PC-Control | Length: 2050 mm | Width: 2280 mm | X axis: 600 mm | Y axis: 460 mm | Z axis: 830 mm | Voltage 50 hz 3x: 400 Volt | Installed power: 4 kW | Machine's weight about: 5000 kg | Height...

2012 STRAUSAK FLEXIMAT

• Manufacturer: STRAUSAK

Software to Numrorto 5.0.1 updated Control: NUM 1062 M | Number of axis total: 5 | Max. grinding wheel diamter: 160 mm | Taper in spindle: 50 ISO | Crosswise: 360 mm | Longitudinal: 240 mm | Vertical: 360 mm | B ...

2024 STUDER S110

• Manufacturer: Studer
• Grinding length: 120 millimeter

SPINDLE SUPPORT PART-HOLDER HEADSTOCK POWER SUPPLY WEIGHT & DIMENSIONS MACHINE HOURS - Software StuderSIM - Coolant tank - Coolant through spindle - Oil mist extractor - Diamond grinding device - Workpiece probe ...

CLEANING EQUIPMENT AMSONIC 8AL

• Manufacturer: Amsonic

20 years, well-maintained and in very good condition, with many spare parts (PLC, washing tank, rinsing tank), She will be available W44 (29.10.25). configuration : 2 loading stations 2 washing tanks 1 rinsing t...

Niche - TM3 - 3-Axis CNC Machining Center

Machine sheets The machine is equipped with a 6 kW COLOMBO tool change spindle (380V, 400Hz) on the U-axis. Speed 0-24,000 rpm via inverter; potentiometer 50–100% of the programmed speed. * Magazine 12 ISO 30 too...