Used software in Africa

Guide Infrared E1 Camera

* High-sensitive infrared detector, resolution 120×90/256×192 * Real-time IR-Perfclear technology, 4 times better image quality * -20°C~550°C wide temperature measurement range, automatic switch * Photo and video...

Deviser TC602RE | 1Gbit/s Ethernet Service Tester with E1 Tester

• Supports two 10/100/1000Base-T electrical interface & two 1000Base-X optical interface • RFC 2544: Throughput, Latency, Packet Delay Variation, Frame Loss, and Back-to-Back (symmetrical and asymmetric results) ...

Tribrer AOR-500 | OTDR

• Automatic one-button testing • 1310/1550 or 1310/1550/1625 nm wavelength • PON online test (only AOR500-P Series) • Short dead zone(8m) • High speed signal processing, short test time and fast analysis • Inter...

Guide Infrared E2+ Camera

* High-sensitive infrared detector, resolution 120×90/256×192 * Real-time IR-Perfclear technology, 4 times better image quality * -20°C~550°C wide temperature measurement range, automatic switch * Photo and video...

Guide Infrared E1+ Camera

* High-sensitive infrared detector, resolution 120×90/256×192 * Real-time IR-Perfclear technology, 4 times better image quality * -20°C~550°C wide temperature measurement range, automatic switch * Photo and video...

TESCA Lan Trainer

FEATURES 01. Three sets of onboard cabling setup for Ethernet. 02. On board parallel port direct cable connection setup. 03. On board serial port direct cable connection setup. 04. A 10 mbps hub is provided onboa...

Professional Quality Twist Grain Pro Moisture Meter (LES-TG-PRO)

Automatic temperature compensation Impedance measuring method with 4 frequencies for increased stability Screw cap buzzer alert for sufficient grain compression Automatic temperature compensation and grain temper...

Interface / Data Acquisition Units (UTCU-0320)

• Manufacturer: Labequip

Measuring Instruments Product Codes: Description: Interface Units are a sophisticated data acquisition unit which provides the link between software and the transducers connected to the test equipment. UTCU -0320...

Guide Infrared E2 Camera

* High-sensitive infrared detector, resolution 120×90/256×192 * Real-time IR-Perfclear technology, 4 times better image quality * -20°C~550°C wide temperature measurement range, automatic switch * Photo and video...

SH Series of digital push pull gauge with Internal Sensor (LES-SH SERIES)

Various models from 2N (200g) to 500N (50kg) Accuracy ±0.5% FS Selectable units: N, Kgf or lbf Instant or Peak hold modes Sample and display update 10 times/sec 4-digit reversible LCD LED comparator -Go/No-go tes...

TDS 3000C Series Digital phosphor Storage Oscilloscopes

Tektronix TDS3000C Series - Bandwidths 100 MHz, 300 MHz and 500MHz models - Sample Rate up to 5 GS/sreal-time on all channels - Waveform Capture Rate 3,600 wfms/s Continuous Waveform Capture Rate - ...

Fluke 54-II

• Manufacturer: Fluke

Fluke FlukeView Software Documentation Store Analyze individual readings or series of measurements Logging 1. FVF-SC1 Fluke 53-II & Fluke 54-II

Alucobond CNC plate processing machine LEPUS – X

LEPUS – X CNC-controlled aluminum and composite panel processing machine – 4 m (3 axes) Characteristics Used for opening, processing and sizing of v-channels of aluminum and composite plates and plates. Aluminum ...

Alucobond plate processing machine LEPUS – II

LEPUS – II CNC controlled composite panel processing machine – 4 m (3 axes) Characteristics Used for cutting and opening v-channels in composite plates and plates. Complex plate repair and excellent processing qu...

Alucobond can processing machine LEPUS – II L

LEPUS – II CNC controlled composite panel processing machine – 4 m (3 axes) Characteristics Used for cutting and opening v-channels in composite plates and plates. Complex plate repair and excellent processing qu...