Used side x side in Belgium

2001 BRANDT F 13 Two-side lip trimmer

• Manufacturer: Brandt
• Model: F13

Working piece thickness (Radius) ca. 16 - 55 mm Working piece thickness (Chamfer) ca. 12 -55 mm Working piece width min. Ca. 30 mm Inner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours)...

1988 BRANDT F 10 Two-side lip trimmer

• Manufacturer: Brandt
• Model: F10

Stationary flush trimming machine for straight or curved pieces Workpiece thickness: 12 - 60 mm Workpiece width: min 30 mm Edge thickness: 1 mm Motors: 2 x 0,26 kW

1999 BRANDT OPTIMAT F 13 Two-side lip trimmer

• Manufacturer: Brandt
• Model: Optimat F13

Working piece thickness (Radius) ca. 16 - 55 mm Working piece thickness (Chamfer) ca. 12 -55 mm Working piece width min. Ca. 30 mm Inner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours)...

2001 BIESSE MILLENNIUM Edge bander single sided

• Manufacturer: Biesse

CNC controlled edging machine serves to edge curved and shaped panels Panel thicnkess: 16 - 50 mm. Edge thickness: 0,8 - 3 mm. Dimensions: min 400 x 400 mm; max 1800 x 1800 mm 650 x 2500 mm unit 1: glue roller wi...

2001 HOMAG... Squaring and edgebanding machine double sided

• Manufacturer: Homag

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, str...

Bench polisher 1side on the right

Motor WEG, 5,5 kW; 955 rpm; 380/660 V With protection/ extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Bench polisher 1side on the right

With protection/extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Bench polisher 1side on the right

Motor WEG, 5,5 kW; 955 rpm; 380/660 V With protection/ extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Vibrating screen with 2 motors on the side

Motor BOSCH, Serial number: 0618102101, 350 W, 1320 rpm, 220/380 V, 1,18/0,69 A Dirt exit 140x100mm Sand exit 190x160mm Meshs 5x5 mm

1997 HOMAG VFL 75 Squaring and edgebanding machine single sided

• Manufacturer: Homag

Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. lamina...

Vibrator for furnaces and ladles f. side-lining

220/380 V, 2,6/1,5 A 3 vibration engines BOSCH With cylinder and pneumatic control by hand Opening Ø 1100 mm - 1600 mm

2019 CASADEI FLEXA 27 Squaring and edgebanding machine single sided

• Manufacturer: Casadei

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Gluing area Pressure zone 1 driven and 2 non-driven rolle...

2022 SCM ME 40 Squaring and edgebanding machine single sided

• Manufacturer: SCM / SCMI

Min./max. thickness edge banding on roll: 0,4 - 3mm Min./max. thickness edge banding in strips: 5 mm Min./max. panel thickness: 8 - 50mm Min. panel length/width: 190/110mm Throughput speed: 9m/min Pre-milling uni...