Used servo controller in 14 Brandenburg, Germany

FANUC motor control

• Manufacturer: Fanuc

Motor control, AC Spindle Servo Unit FANUC A06B-6059-H003 Spare part for Toyoda HES52 ! used, tested !

CAE/General Scanning SCAN ASSY -Left-Right - 2x CX660 2xMG350DT 2xDC-Servo Motor

• Manufacturer: CAE Canada / GENERAL SCANNING / INERTIAL MOTORS

SCAN ASSEMBLY for VFR CONDX SIMULATION Manuf: CAE Canada / GENERAL SCANNING / INERTIAL MOTORS Model: 223735-01-2-258 consisting of: two UNITS ....CAE SCAN ASSY ; one ..RIGHT and one LEFT ....model 223735-01-2-258...

MTPC control cable

Control cable, connection cable, motor connection cable, servo cable MTPC RC 3-0010-00-171 AWM Style 21576 E192076 14 + 4 conductors + shielding max. 80° max. 1000 V used, tested !

ZEISS electronic module

• Manufacturer: Zeiss

Electronic module , servo controller, servo module ZEISS 608482-9014 608481-4905 Spare part for 3D coordinate measuring machine ! used, tested ! plug defective !

KUKA electronic module

• Manufacturer: Kuka

Electronic module, servo controller KUKA NM100AB used, tested !

INDRAMAT electronic module

• Manufacturer: Indramat

Electronic module, AC servo controller INDRAMAT ECODRIVE FWA-ECODRV-ASE-02VRS-MS DKC01.1-030-3-FW

ZEISS electronic module

• Manufacturer: Zeiss

Electronic module , servo controller, power supply unit ZEISS 608483-9009-0901 Spare part for 3D coordinate measuring machine ! used, tested !

REXROTH electronic module

• Manufacturer: Bosch - Rexroth

Electronic module, AC servo controller REXROTH, INDRAMAT ECODRIVE DKC01.1-040-7-FW FWA-ECODRV-ASE-02V20-MS used, tested !

SIEMENS electronic module

• Manufacturer: Siemens

Electronic module, servo controller with overvoltage limiter SIEMENS SIMODRIVE 6SN1145-1BA01-0DA1 Spare part e.g. for machining center HECKERT CWK400 D ! used, tested !

KUKA electronic module

• Manufacturer: Kuka

Electronic module, servo module KUKA BMC15/20Kb used, tested !

KUKA electronic module

• Manufacturer: Kuka

Electronic module, servo module KUKA BMC15/45Kb used, tested !

YASKAWA electronic module

• Manufacturer: Yaskawa - Motoman

Electronic module, servo module YASKAWA ELECTRIC CPCR-FR02 BY22 ( CPCR-FR02BY22 ) spare part e.g. for SEIBU eroding machine EW 600 J ! used, tested !

LITTON angle encoder

Angle encoders, encoders LITTON SERVO TECHNOLOGY G58 SSLDBI G58SSLDBI-2500-525-05AX 3x threaded hole: M4 x 0.7, depth: 8 mm approx. 0.85 m connection cable with 12-pin plug used, tested !

BAUMÜLLER frequency inverters

• Manufacturer: Baumuller

Frequency inverters, built-in compact servo inverters BAUMÜLLER BM3313 BM3313-ST20-00500-11120-S02-01-E80-# 00 max. 5.0 kW 50 / 60 Hz 0 - 450 Hz used, tested !

2011 HELLER MC 2000

• Manufacturer: Heller
• Model: MC 2000

Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping...