Used separators in South Africa

Hydrometer Test Set (UTS-0270)

Soil Classification Hydrometer Test Set is used to determine the particle size distribution of very fine materials such as silt and clay. The soil dispersion mixer for hydrometer test method, operates at over 13,...

Digital Length Comparator (UTCM-0200)

Thermal and Weathering Properties Product Code: Length Comparators are used to determine the length changes on different type of hardened mortar and concrete prisms with different sized. The sets consist of a len...

ASTM & AASHTO – Manual Compression Testing Machines (UTC-4701.MLP)

• Manufacturer: UTEST

MANUEL Compression Testing Machines Product Code: Description: The UTEST 600 kN and 1500 kN capacity Manual Compression Testing Machines are designed to perform reliable compression tests on concrete specimens es...

EN 772-1 and General Purpose Semi-Automatic Compression Testing Machines for Masonry Units/Blocks, Cylinders and Cubes (UTC-4609EG.SLP)

• Manufacturer: Labequip

SEMI-AUTOMATIC Compression Testing Machines Product Codes: Description: UTC-4609E.SLP and UTC-4709E.SLP models Semi-Automatic Compression Testing Machines are manufactured for compression testing of masonry units...

GENERAL PURPOSE and EN 772-1 SEMI-AUTOMATIC Compression Testing Machines for Masonry Units/Blocks, Cubes and Cylinders (UTC-4714GE.SLP)

• Manufacturer: UTEST

SEMI-AUTOMATIC Compression Testing Machine Product Codes: 4714GE.SLP 4729GE.SLP 4739GE.SLP 4714GE.SLP-N 4729GE.SLP-N 4739GE.SLP-N Description: UTC-4714GE.SLP, UTC-4729E.SLP, and UTC-4739E.SLP model Semi-Automatic...

Multiplex Machine with Servo Motor and BC100 TFT Graphics Data Acquisition and Control System, 50 kN (UTM-0108)

Multiplex Machines Product Codes: Description: Multiplex Machine is used to make Uniaxial, CBR and Marshall Tests. 50 kN capacity Multiplex Machine is equipped with a servo motor and BC100 TFT graphics data acqui...

Digital Length Comparator (UTCM-0200)

Thermal and Weathering Properties Product Code: Length Comparators are used to determine the length changes on different type of hardened mortar and concrete prisms with different sized. The sets consist of a len...

ASTM & AASTHO: Semi-Automatic Compression Testing Machines for Cylinders (UTC-4601.SLP)

• Manufacturer: Labequip

SEMI-AUTOMATIC Compression Testing Machines Product Code: Description: UTC-4601.SLP, UTC-4701.SLP, UTC-4602.SLP, UTC-4702.SLP, UTC-4712.SLP, UTC-4722.SLP and UTC-4732.SLP Semi-Automatic Compression Testing Machin...

Asphalt Binder Analyzer (ABA) (UTAS-0060-C)

• Manufacturer: UTEST

Analysis of Bituminous Mixtures Product Codes: Description: The UTEST ABA Asphalt Binder Analyzer is used to determine the binder content of hot mix asphalt/bituminous mixtures by the method of loss on ignition. ...

Concrete Creep Testing System (UTSP-0400)

• Manufacturer: UTEST

Description: UTEST Creep Testing System on Concrete specimen is designed to determine time – dependent deformation of concrete under sustained and constant load. Deformation is monitored periodically over time an...

MILK CLARIFICATION

Standard design of these separators provides the product feeding under pressure by a soft inflow system. Then the product is accellerated to separation speed without damage being caused to any of the fat globules.

TBL5016-3 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 4 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for te...

Semi-Automatic Digital Bitumen Penetrometer (UTB-0120)

Bitumen and Bituminous Binders Product Codes: Description: The UTB-0120 Semi-Automatic Digital Bitumen Penetrometer is used to determine the penetration of bituminous samples under constant load, time and tempera...

Semi-Automatic Digital Bitumen Penetrometer (UTB-0120)

Bitumen and Bituminous Binders Product Codes: Description: The UTB-0120 Semi-Automatic Digital Bitumen Penetrometer is used to determine the penetration of bituminous samples under constant load, time and tempera...

TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F

• Manufacturer: LiSN

The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...