Used separators in Riga, Latvia

Vibratory separators for grading wet or dry materials

Vibratory separators for grading wet or dry materials up to five fractions in one operation These revolutionary vibratory separators are designed for accurate grading, scalping or sizing of wet and dry material...

Gyratory sifter for grading wet or dry materials

• Manufacturer: ROSTA Engineering

The most cost effective gyratory sifter for grading wet or dry materials up to five fractions. These high performance gyratory sifters offer a cost effective solution to virtually any screening requirement, inclu...

Separator

High productivity up to 100m3 / h through one separator. Significantly reduces the cost of regenerating industrial effluents. Return of dry residue back to production. Easy to maintain. Possible uses: • Filtratio...

Separating and stamping

• Manufacturer: ROSTA Engineering

Herzog sophisticated separating and stamping techniques enable optimum processing of specimens and pins for further investigations such as CNS analysis. Models: HSA Pneumatic pin cutter for steel samples: The HSA...

Board separator/hill

• Manufacturer: Sweden

Sizes: 5, 4×2, 4, h=2, 45 El/motor 5, 5kW Agenda, Warehouse in Ikškile.

Board hill, separator

Board hill, separator

1984 CLAAS Dominator 86

• Manufacturer: Claas
• Model: DOMINATOR 86
• Horsepower: 120 horsepower
• Hours: 2,702 hour

Salmu smalcinātājs Hours: 2,702 h | General grade: 4 | Separator hours: 2,702 h

1979 Deutz-Fahr 1302

• Manufacturer: Deutz-Fahr
• Model: 1302
• Hours: 2,848 hour
• Separator hours: 2,800 hour

Header trailer Crop lifters Straw chopper Chaff spreader Daba platums 4.2 metri

Claas Lexion 750 TT

• Manufacturer: Claas
• Model: LEXION 750
• Horsepower: 496 horsepower
• Hours: 4,660 hour

Working width: 930 cm | Engine output: 317 kW | Hours: 4,660 h | Separator hours: 2,866 h | Rear tire size: 500/85R24 | Production country: Germany | Combine configuration: Small grain configuration | Seats: Clo...

John Deere 9780 i CTS

• Manufacturer: John Deere
• Model: 9780i CTS
• Horsepower: 348.66574309939 horsepower
• Hours: 3,653 hour

Working width: 915 cm | Engine output: 282 kW | Hours: 3,653 h | Separator hours: 2,257 h | Cylinders: 6 cyl. | Traction type: 2 WD | Front tire size: 900/55R32 | Rear tire size: 540/65R30 | Seats: Clothed

Deutz-fahr 6205 TS

• Manufacturer: Deutz-Fahr
• Horsepower: 244.066020169573 horsepower
• Tire size: 650/75R32

General grade (1 min - 5 max): 5/5 | Working width: 540 cm | Engine output: 182 kW | Hours: 1,125 h | Separator hours: 715 h | Cylinders: 6 cyl. | Traction type: 2 WD | Front tire size: 650/75R32 | Rear tire siz...

JFC Evolution S4

JFC Evolution is designed for automatic, controlled calf feeding. The device mixes the powder with heated water (from +5°C to +30°C) according to a set rate, and each animal receives the exact amount of feed assi...

JFC Evolution S2

JFC Evolution S2 is designed for automatic, controlled calf feeding. The device mixes powder with heated water (from +5°C to +30°C) according to a set rate, and each animal receives exactly the amount of feed ass...