Used sensors & controllers in Chuo City, Tokyo, Japan

Daiya Vacuum DIAVAC PC-1DA

• Manufacturer: Diavac

Device name: Gauge Controller | Remarks: Sensor and Cable Included

2004 Okuma LB300-M

• Manufacturer: Okuma
• Model: LB300 M

OSP-E100L 10-inch 3-jaw chuck draw-down chuck 12-corner turret (composite) with touch sensor Right-hand tip conveyor If there is any discrepancy between the content and the actual product, the actual product will...

RCU-55 radio-controlled mulcher

This latest model utilizes all of FAE's expertise in mine disposal machines, mulchers, and tracked carriers. The RCU-55 can be equipped with two dedicated mulcher heads. With the BL1/RCU, it can crush wood up to ...

2006 OKK VM5 III

• Manufacturer: OKK
• Model: VM5

FANUC180iS-MB BBT40 ATC30 Table size 1250 x 560 Stroke X1020 Y510 Z510 Spindle speed 14000 rpm In-machine spiral Touch sensor If there is a discrepancy between the contents and the actual product, the actual prod...

2012 Mori Seiki NVX5080/40

• Manufacturer: Mori Seiki
• Model: NVX-5080

M730BM(MELDAS) BT40 ATC30 Table size 1100 x 600 Spindle speed 12000 rpm Stroke 800 Y530 Z510 With tool length measurement With touch sensor If there is any discrepancy between the contents and the actual item, th...

2007 Okuma MA-500HB

• Manufacturer: Okuma
• Model: MA-500HB

OSP-P200M BT50 ATC60 spindle speed 6000rpm 6 pallet 500 square with right hand chip conveyor with magnetic separator with center through with touch sensor If there is any discrepancy between the contents and the ...

2016 mori seiki (dmg mori seiki) milltap700

• Manufacturer: DMG Mori
• Model: MILLTAP 700

SINUMERIK (S840DEsl) BBT30 ATC25 Table size 840 x 420 Spindle speed 10000 rpm Cutting tank Posterior inserticon With tool length measurement With touch sensor If there is any difference between the contents and t...

2003 Okuma MA-500HB

• Manufacturer: Okuma
• Model: MA-500HB

OSP-E100M BT50 ATC60 spindle speed 6000rpm 6 pallet 500 square 500 square with center-through with chip conveyor for right hand feed with touch sensor If there is any discrepancy between the contents and the actu...

2020 Okuma MILLAC-611VII

• Manufacturer: Okuma
• Model: MILLAC

FANUC31i-B BBT50 ATC20 Table size 1600 x 610 Spindle speed 4000 rpm Stroke X1300 Y610 Z560 With tool length measurement With touch sensor With mist If there is any difference between the contents and the actual i...

2006 Mori Seiki NV5000α1A/40

• Manufacturer: Mori Seiki
• Model: NV-5000

MSX-501Ⅲ(FANUC) BBT40 ATC30 Table size 1100 x 600 Spindle speed 14000 rpm Stroke X800 Y510 Z510 With touch sensor If there is a discrepancy between the contents and the actual product, the actual product will tak...

2006 Mori Seiki DuraVertical5060

• Manufacturer: Mori Seiki
• Model: DURAVERTICAL

MSC-504 (FANUC) BT40 ATC 30 pieces Table size 900 x 600 Spindle speed 10000 rpm Stroke X600 Y530 Z510 Touch sensor included Pull stud MAS1 If there is a discrepancy between the contents and the actual product, th...

2017 Mori Seiki CMX800V

• Manufacturer: Mori Seiki

FANUC0i-MF BBT40 ATC 30 pieces Table size 1100 x 560 Spindle speed 12000 rpm Straw X800 Y560 Z510 With tool length measuring device With touch sensor With mist If there is a discrepancy between the contents and t...

2007 Mori Seiki NV5000α1A/40

• Manufacturer: Mori Seiki
• Model: NV-5000

MSX-501Ⅲ(FANUC) BT40 ATC30 Table size 1100 x 600 Spindle speed 14000rpm Stroke X800 Y510 Z510 With tool length measuring device With touch sensor With helical interpolation With rigid tap If there is any differen...

2012 Yamazaki Mazak HCN-5000-II

• Manufacturer: Mazak
• Model: HCN 5000

MAZATROL MATRIX NEXUS BT40 ATC 40 pieces 500 square 2 pallets Spindle speed 18000 rpm Stroke X730 Y730 Z740 With touch sensor With center through 1 degree indexing With chip conveyor If there is a discrepancy bet...

1996 Mitsui Seiki HU63

• Manufacturer: Mitsui Seiki
• Model: HU63

FANUC16M BT50 ATC120 630 angles, spindle speed 6000 rpm, stroke: X900 Y800 Z800 2 pallets, optional indexing, center through, touch sensor, with chip conveyor, with tool length measuring device If there is any di...