Used sensor in Piedmont, Italy

2024 MASCHIO GASPARDO Rotopressa EXTREME1 Mod. 165HTI

• Manufacturer: Maschio - Gaspardo

NEW MACHINE READY FOR DELIVERY Variable chamber press with pre-start chamber Hydraulic compression with density regulation 6 stapled straps 179mm wide Automatic chain oiling Mechanically variable geometry (4...

Raising machine MAGNOLFI & BENASSAI

- exit on cakes - n.48 ply - suction device - optical yarn presence sensors BTSR - lateral feeding creel

1997 Electronic cone winder SIMET

mod.SES - n.12 heads each - double-sided - pitch 6" (152 mm) - 2.5-turn variable-pitch grooved drum - mechanical yarn clearer - motorized waxer - optical yarn presence sensor - year 1997

1988 Assembly winder FADIS

Mod.TUAN/B.E - n.24 heads - pitch 8"(200 mm) - tube internal diam.43 mm - 2 ply,optical sensor BTSR - creel from below - meter counter - cutter device - year of construction 1988

1991 Reeling machine FADIS

• Manufacturer: FADIS

-n.2 independent swifts of 1.5 m -n.3 hanks per swift (total 6 hanks) -adjustable perimeter from 1300 to 1550 mm -hanks width 300 mm -upper creel with 3 ply presence sensors -year of construction 1991

1998 Interlacing machine FADIS

- n.36 heads each - yarn guide - pitch 8" (200 mm) - feeder for lycra - Heberlein interleacer - yarn presence sensors - ceramic comb yarn stretcher - meter counter - roller oiling device - creel - year of constru...

1997 Assembly winder FADIS

Mod.TUAN/B.E -n.12 heads -automatic doffing -pitch 8 inch (200 mm) -tube diam.43 mm -external creel with 3 ply + reserve and creel from below with 1 ply presence sensor -meter counter -cutter device -Magitex with...

2009 Electronic Hank-to-cone winder Fadis

mod.Sincro/D-SW P500 -n.20 heads -pitch 6" (152 mm) possibility to increase it to 8" (200 mm) -conicity 5°57' -motorized reel -reel width 350 mm -tension sensor device that interacts with the speed of the reel -a...

2005 Automatic cone winder SAVIO ORION LR

• Manufacturer: Savio

-main Unit Left -n.56 heads -feeding by cone with single pin -2 turns drums constant pitch -pitch 6" (152 mm) -conicity cylindrical -electronic modulation C.A.P. -tension sensor -axial motion -waxing device -mech...

1994 Shrinking (H.B.) Machine MOTOCONO Mod.H.B.I.

• Manufacturer: Motocono

- n.52 independent heads - n.13 modules of 4 heads each - internal feeding creel - pneumatic threading of the yarn - carpets made of stainless steel - optical sensor at the exit of the oven - year 1994 Output: N....

2004 Automatic cone winder SAVIO ORION LR

• Manufacturer: Savio

- n.60 heads - manual cone feeding (1 cone) - pitch 6" (152 mm) - conicity cylindrical,tube 43x170x54 mm - drum diam 94 mm. 2 turns symmetric step - automatic doffing (n.3 trolleys - empty cones feeding individua...

Electronic cone winder BE.MA.TEX mod.PE-20

- n.20 spindle single sided - grooved drum 100 mm diameter, 2.5 turns constant pitch - individual AC coaxial motor per spindle driven by inverter - yarn traverse 10 inch (250 mm) – tube length 280/290 mm - conici...

Electronic assembly winder BE.MA.TEX mod.SA-25

- single side - n.25 spindles - grooved drum 2,5 turns parallel, 90 mm diam. - individual AC coaxial motor per spindle - yarn traverse: 8 inch (200 mm) - tube length 220 mm - conicity cylindrical tube diam. 43 mm...

Electronic cone winder BE.MA.TEX mod.CA-12

- Machine configuration: Single sided with n.12 heads - Yarn traverse: 6 inch (152 mm) - Grooved drum 95 mm diameter, 2 turns variable pitch - Individual AC coaxial motor per spindle - Conicity: 4°20’ (tube tip d...