Used rollers in Flanders, Belgium

2014 HAMM HD12VV

• Manufacturer: Hamm
• Model: HD 12 VV
• Operating weight: 3,410 kilogram

Weight [kg]: 2.47 | Width [m]: 2.53 | Height [m]: 1.31 | Payload [kg]: 2690 | Location machine: Belgium - EU

2016 BOMAG BW100ADM5

• Manufacturer: Bomag
• Model: BW100 ADM
• HP: 20.249433541541496 horsepower
• Hours: 1,726 hour

Engine: Kubota D902 EF04 | Weight [kg]: 1570 | Power [kw]: 15.1 | Hours (on hour meter): 1726 | Ce mark: ok | Length [m]: 2.02 | Width [m]: 1.05 | Height [m]: 1.52 | Cylinder: 4 | Location machine: Belgium - EU

2008 VIET VALERIA 4CCC INF. 1350... Top and bottom calibrating sander

• Manufacturer: Viet

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, ...

2002 GABBIANI TR 100 Panel turning device

• Manufacturer: Gabbiani

In line 90° panel turning device (or transport crosswise without turning) Panels entering lengthwise, turning them to crosswise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 m...

2011 GRIMME varitron 270

• Manufacturer: Grimme
• Model: Varitron 270

Varitron 270 0 star machine year of construction 2011 row distance 2 75cm multiseps + roller table (vario) water to spray on roller table -------------------------------- varitron 270 0 stars machine year of cons...

2016 BOERE SANDRITE 1100 KKC Wide-belt sander

• Manufacturer: Boere

Useful sanding width: 1100 mm. Sanding belt dimensions: 1110 x 1900 mm. Number of sanding aggregates: 3 Roller steel grooved 15 kW, Roller 70° shore 18.5 kW, Roller 50° shore Aggregate 2 & 3 with shared motor Max...

1985 KUESTERS 413.5

• Manufacturer: Kuesters

Thermo-bonding Calander Küsters type 413.50 year of construction 1985, Nominal width: 3700 mm, Fabric width: 3500 mm / conversion to 3200 mm, total force: 555 kN, Line force: 150 N/mm, Production speed: 10-150 m/...

Wafios DS-50 wire nail press

• Manufacturer: Wafios

including 2 roller decoiler roller width approx. 390 mm currently used roller diameter approx. 760 mm wire thickness range: 1,4 to 2,5 mm working wire up to max 2,8 mm nail length for large head nails: 8 50 mm...

2002 GABBIANI TR 100 Panel turning device

• Manufacturer: Gabbiani

In line 90° panel turning device Panels entering lengthwise, turning them to crosswise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported o...

2002 GABBIANI TR 001 Panel turning device

• Manufacturer: Gabbiani

In line 90° panel turning device Panels entering crosswise, turning them to lengthwise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported o...

2012 FIN S.R.L. CLN 1800 Sandwich panel press

Roller length 1820mm Roller diamter 145mm Rubber thickness 9mm Rubber hardness SHORE 50A Working plane height 910mm Max passage between rollers 120mm Forwarding speed 15,2 m/min Requested air Bar 4/8 Motor power ...

Wafios DS-50 wire nail press

• Manufacturer: Wafios

including 2 roller decoiler roller width approx. 390 mm currently used roller diameter approx. 760 mm wire thickness range: 1,4 to 2,5 mm working wire up to max 2,8 mm nail length for large head nails: 8 50 mm...

Bode SAR-400

• Manufacturer: Bode

Self-aligning rotators capacity driven unit: 10 ton capacity non-driven unit: 10 ton minimum diameter of workpiece: 450 mm maximum diameter of workpiece: 4600 mm roller dia: 381 mm roller width: 76 mm

Bode SAR-1200

• Manufacturer: Bode

Self-aligning rotators capacity driven unit: 30 ton capacity non-driven unit: 30 ton minimum diameter of workpiece: 500 mm maximum diameter of workpiece: 5500 mm roller dia: 559 mm roller width: 127 mm

2001 Omganor 600P3S Radial Arm Saw

Equipped with supply and discharge roller conveyor