Used robotics in Bavaria, Germany

3D welding table D28 Okto 100 SW 1000

Preferred use on manipulators of robot cells A wide range of clamping options on all nine clamping surfaces System bores D28 Diagonal grid 100 x 100 mm THE FOLLOWING ADDITIONAL OPTIONS ARE AVAILABLE ON REQUEST: I...

3D welding table D16 Okto 50 SW 1000

Preferred use on manipulators of robot cells A wide range of clamping options on all nine clamping surfaces System bores D16 Diagonal grid 50 x 50 mm THE FOLLOWING ADDITIONAL OPTIONS ARE AVAILABLE ON REQUEST: In ...

3D welding table D28 Okto 200 SW 1000

Preferred use on manipulators of robot cells A wide range of clamping options on all nine clamping surfaces System bores D28 Diagonal grid 100 x 100 mm THE FOLLOWING ADDITIONAL OPTIONS ARE AVAILABLE ON REQUEST: I...

Spacer bracket D28 U-shape L500, alu-titanium

For use as a table extension Up to 2 / 3 Lighter than steel but still stable Also suitable for use in robot cells Diagonal grid 100 x 100 mm, with grid lines Clamping surface: 5-sided Further options for system D...

Uniclean® PL II 15

The Uniclean® PL II 15 is the highest performance washer-disinfector from MMM and has been developed for the thorough reprocessing of large quantities of medical devices. The innovative single-chamber machine can...

2017 Linde L-MATIC 1170

• Manufacturer: Linde
• Model: L-MATIC

Batterie: Gruma / 24 Volt 3 PzS 375 Ah (Baujahr 05/2017), Aquamatic und Elektrolytumwälzung auf Batterie, Fahrzeugstecker REMA 160A, seitlicher Batteriewechsel mit Rollen, Ladegerät extern (POWERTRON E HF EUW 24/...

2002 DEMAG DEMAG ET 650/1000-3300 NC4

• Manufacturer: Demag
• Model: NC4

DEMAG IMM hydraulic toggle clamping unit. Icrew diameter 80 mm injection volume 1780 cm³ clamping force 715 US tons dist. betw. tie bars 1.000 x 900 mm daylight 1.880 mm 3x + 2x hydraulic core puller Robot interf...

2008 ASM Advance 400

• Manufacturer: ASM
• Model: ADVANCE 400

ASM Furnace Vertical - Advance 400 2 Reactor atmospheric Robot defect and need service

1996 ASM Advance 400

• Manufacturer: ASM
• Model: ADVANCE 400

ASM Furnace Vertical 2 Reactor atmospheric Reactor 1 is missing heater cassette, Motor driver, Board and loader arm

1999 ASM Advance 400

• Manufacturer: ASM
• Model: ADVANCE 400

ASM Furnace Vertical - Advance 400 2 Reactors atmospheric

2000 ASM Advance 400

• Manufacturer: ASM
• Model: ADVANCE 400

ASM Furnace Vertical - Advance 400 2x Reactor Dot. Poly Low Pressure

2012 JOZ JT200 defective - spare parts dispenser

• Manufacturer: JOZ

cm JOZ-TECH JT200 slatted robot used - defective! In need of repair, suitable as a spare parts dispenser Slider width 1.40 m With charging station (230V light current) With control unit

1999 ASM Advance 400

• Manufacturer: ASM
• Model: ADVANCE 400

OFENV01DFurnace with 2 Tubes 1x Reactor Dot. Poly Low Pressure 1x Reactor Atmosphere WET-OXID

1997 Canon CAI519

• Manufacturer: Canon

Canon FPA 3000 i5+ General Configuration: Canon FPA 3000 i5+

2016 LAM Research Corp. WETV18-04

• Manufacturer: Lam Research - Novellus

SEZ 304 Minimum: 150 mm | Maximum: 300 mm | Set size: 300 mm | Number of robots: 1 | Tank material: PVDF | Automatic wafer transfer: YES | Controller type: Microprocessor Controller Type | Other information: the ...