Building Filters
EAST SEF 5E 1424 1 Control card Output card from KUKA Roboter
- Manufacturer: East
EAST SEF 5E 1424-1 control card output card from KUKA robot used 100 % functional
$58 USDRemscheid, Germany
2003 ENGEL ERC 127 E
- Manufacturer: Engel
ENGEL ERC 127 twin-robot on top of FAP suitable for IMM in the range of 2.000 to 4.000 tons clamping Need EUROMAP robot interface Low running hours, approx. 22.000 hrs. only Vertical axle in telescope design ...
Solingen, Germany
Solingen, Germany
Solingen, Germany
Solingen, Germany
2006 Robot welding cell Cloos type Z6
- Manufacturer: Cloos
The Cloos Romat 320 welding robot is installed in a forklift-capable welding cell with attached partition walls on a stand base for vertical robot support. The Rotrol II V4 control system includes the software op...
Haiger, Germany
2003 Wittmann W620M -636, Robot System
- Manufacturer: Wittmann
- Model: W 620
Removal X-axis 300 mm PNE Vertical Y-axis 1000 mm PNE Horizontal Z-axis 1250 mm MOT
Mülheim, Germany
2005 Demag 200/580-840 Extra with robot
- Manufacturer: Demag
Robot Notches 1 Control: NC 4 | Clamping force t: 200 | Opening stroke mm: 575 | Distance between tie bars mm: 580x580 | Installation height min / max mm: 340/690 | Mold fixing platen size h x v: 860x860 | Screw ...
Mülheim, Germany
1998 Krauss Maffei KM 500-2700 C1, with Sepro Robot
- Manufacturer: Krauss-Maffei
The coupling Engine - Pumpdrive is new Euromap 12 Seprorobot 3041 BZ S900-II
Mülheim, Germany
Stäubli TX90 industrial robot arm with complete control and operator panel
- Manufacturer: Stäubli
Stäubli TX90 industrial robot arm SN:F04/50Y0A1/A/01 with CS8 C complete control and operating panel, used, normal traces of use, 100% functional, scope of delivery according to photos, ATTENTION: Please enquire ...
1999 Engel ERC 53/1 - CL, Roboter
- Manufacturer: Engel
X-axis removal stroke 650 mm Y-axis vertical stroke 1,300 mm Z-axis transverse transport 2,600 mm ***** basic unit ***** X-axis removal stroke Max. Travel 650 mm Drive Servo motor Y-axis Vertical travel Max. Trav...
Mülheim, Germany
KUKA KR420 R3080 robot + KR C4 controller + panel as good as new
- Manufacturer: Kuka
KUKA KR420 - R 3080 robot SN:405901 , only operating hours: 550 + KR C4 controller + manual control unit SN:292592 , absolutely mint condition, 100% functional, scope of delivery according to photos , ATTENTION: ...
2019 Tornos MultiSwiss 8x26
- Manufacturer: Tornos
- Model: Multiswiss 8X26
full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps The scope of delivery regarding the tooling e...
Rösrath, Germany
2016 Tornos MultiSwiss 8x26
- Manufacturer: Tornos
- Model: Multiswiss 8X26
full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps The scope of delivery regarding t...
Rösrath, Germany