Used pull type in Japan

2016 OKUMA MILLAC 561VⅡ

• Manufacturer: Okuma
• Model: MILLAC 561V
• Control: OSP-P300MA

Travel: X: 1,050, Y: 560, Z: 520mm Distance between table and spindle nose: 170～690 mm Spindle taper: BBT50 (BIG plus) Hinged lift-up chip conveyor (rear, left discharge) Spindle center through (coolant 7.0 MPa) ...

2016 Emura Sales Corporation Model ECM-201

• Manufacturer: Emura Sales Corporation

Weight: 184 kg Slice size: 0.7 mm to 100 mm" (depending on blade)

Die Spotting Press SANKI SEIKO SDP-1310-100T

• Manufacturer: 三起精工(株)

Commodity id: 980425KIY-1 | Maker: SANKI SEIKO Co. | Model year: 1997 | Specification: 100ton 180°reversible type Table: 1300 x 1000 Open height - 1200mm Stroke-1130mm Pulling capacity: 39Ton Mold loading capaci...

2012 Isuzu ELF refrigerator truck (low temp.) 2t-3t low temp. power gate rear shutter

• Manufacturer: Isuzu
• Model: TKG-NMR85N

Made by Denso (-32 degree setting) . Side door. Everhouse specification. Stainless steel floor. Pull-out power gate. Lashing rail. Rear-view Camera, Navigation System, ETC, Manual, Record Book. Refrigerator (Dens...

2016 Yamazaki Giken YZ-500WR

• Manufacturer: 山崎技研

Travel X : 1,250 Y : 550 Z : 520 mm Distance from spindle to table top : 140 to 660 mm X-axis stroke extension (stroke 1250 mm) Chip coil conveyor (inside the machine) Table splash guard Partition type Pull stud ...

1996 Trailmobile PMR439BH

• Manufacturer: Trailmobile

16-wheel heavy equipment hauling trailer Middle drop 6.5m 2-diff pull Width 299cm Maximum load 32.7t Front turning radius: 94cm Floor to ground clearance: 70cm King pin to ground clearance: 135cm *Fifth wheel loa...

Futaba AFE-100

• Manufacturer: Futaba

Futaba Electronics 100mm Air Feeder AFE-100 Width 100mm, thickness 0,1-1,5t, feed length 130mm Solenoid valve type Pull direction

Yamato RE201

• Manufacturer: Yamato

Manual lift with analog control Features of Rotary, Evaporators (RE201) Features Economical Features Improved operability with variable type rotary joint, distillation flask pull-out structure, Hose joint, large ...

Murakoshi MY-60X

• Manufacturer: Murakoshi

Equipped with a highly energy-efficient inverter. Air volume can be adjusted. Plastic bags are secured with a one-touch ring. Easily removable by pulling the ribbon. φ100 duct hose Hose band Round hood Various op...

murakoshi my-75x-box

• Manufacturer: Muracosi
• Weight: 45kg

Built-in inverter with high energy saving effect. Air volume adjustment is possible. Poly bags Fixed with one touch ring You can easily remove it by pulling on the ribbon. φ100 duct hose Hose band Round hood Sinc...

Murakoshi MY-75X

• Manufacturer: Murakoshi
• Weight: 45kg

Equipped with a highly energy-efficient inverter. Air volume can be adjusted. Plastic bags are secured with a one-touch ring. Easily removable by pulling the ribbon. φ100 duct hose Hose band Round hood Various op...

Steel engine cutter concrete asphalt body junk dry type 420 Husqvarna diamond blade set

• Manufacturer: Husqvarna

The main unit of this item is treated as junk. No compression when pulling recoil and no spark. The Husqvarna Proffesional Diamond Blade Dry 420 12" was used only once to cut asphalt 2m long, 50cm wide and 10cm d...

2025 Japan Full Half DFPFH341A Revision

• Manufacturer: Japan Full-Half

With inspection until July, 2008 Never used 3-axle Aluminum Block Flat Trailer 13m body Max. load 27.4t Lift axle (When axles are lowered: rear front axle weight 2160kg, rear middle axle weight 2160kg, rear rear ...

Frame correction machine

Chief Impulse E/VHT (lift type) Main frame from 483 to 1,016mm Height can be selected from 483 to 1,016mm. Click here for a larger image See 452 for the name of each part

Synx NRP II

• Manufacturer: Thinks

Hand-operated planing machine Automatic planing machine with automatic lifting device Three types of machines, a circular sawing machine and an automatic planer with automatic lifting device, are combined in one ...