Used pull type in berugi

Pull Type Road Grader

Missing front axle and hitch. The rest of it appears to be complete. Manual adjustment for raise, tilt, and grade. Blade measures 7ft wide.

Pull Type Pan Scraper

Cable lift operation. 2 tires hold air, all tires need replaced. A set of dual tires and axle are removed from the machine but included. Machine has a rear hitch but missing receiver. Appears to be in solid condi...

Pull Type Pan Scraper

Cable lift operation. 2 tires hold air, all tires need replaced. Rear hitch is welded up but missing the mount. Appears to be in solid condition. Has a 9-1/2ft working width.

Pull Type Pan Scraper

Made by the Curtiss-Wright Corporation, Model: GWT-18M, Serial number: 118295. Cable lift operation, 18 yards capacity. 3 tires hold air, one does not, tires are cracked and weather checked. Appears to be complet...

Pull Type Pan Scraper

Cable lift operation. Missing wheels and tires. Appears to be in solid condition. Has a 9-1/2ft working width.

Pull Type Pan Scraper

Working width is 102”. Rear axle has 4 tires, one holds air and the rest need replaced. Front axle also has 4 tires, one holds air and the rest need replaced. Hydraulic lift and hydraulic dump. Appears to be in d...

Pull Type Road Grader

Hitch is welded up, missing one of the steering rods. Two tires hold air and two don’t, tire size 8.25-20. Rear axle pivots side to side, manual controls for the blade and axle. Blade is 11ft wide.

Pull Type Box Scraper

Hydraulic cylinder for the raise/lower is missing the rod. Has two large flat spoke steel wheels on the back. Both frame rails have been bent but the right one is bent and curled upward. Appears to be mostly comp...

Pull Type Box Scraper

Heavy duty I-beam hitch, manual adjustments, round spoke wheels. One wheel has a bend in the outer wheel surface. The cutting edge is broken in a few places.

Caterpillar Pull Type Combine

• Manufacturer: Caterpillar

Serial number: 3663. Header is missing. Auger housings and troughs are rusting out. Some of the body panels have patch panels welded on them. Several parts are missing.

Pull Type Pan Scraper

Hitch appears to be homemade. There are several cuts and welds along the entire machine, it has been modified. Scraper pan is 7ft wide. Appears to be complete.

Pull Type Road Grader

Hitch is welded up and egged out. Blade is 20ft wide and damaged on the right hand side rear axle pivots side to side. Hand crank adjustments for the blade. Appears to be complete.