Used pull type in St Gallen, Switzerland

Painted push-pull struts

We offer the following used push-pull props or push-pull struts 192 x inclined support type I-M 1,80-3,00 m with one end joint 16 x inclined support type II-M 2,10-3,65 m with one end joint 109 x inclined prop ty...

Atlas Copco P 2000i - Inverters

• Manufacturer: Atlas-Copco
• Model: P 2000i

* Pull starter * Large fuel tank 4 liters (up to 5 hours runtime) * Engine oil level monitor * Overheat protection * Silenced hood CE compliant noise level * Sockets * AVR automatic voltage regulation * Instrumen...

2009 MICRO CENTRIC 9-500-6-QC 42974

• Manufacturer: MICRO CENTRIC

Precision air chuck Ø240mm (Type 9-500-6QC) Technology: APC Repeatability approx. 0.0015 Jaw stroke 12mm concentricity: approx. 0.005 mm base jaw DRM 134-182mm - as new unused air chuck Equipment: - Jaw Ø 174 - 1...

2006 GALLUS EM 510C

• Manufacturer: Gallus

GALLUS EM 510 C punching stations and 2 as printing stations Equipment: - Unwind - 76 mm - Web tension control (Arsoma) - splice table - Side edge control (E&L) - insetter - Hot air drying at station 1 - UV dryin...

Coil conveyor system

consisting of: Double-turning decoiler, Saronni, type 38/C/500, max. coil weight 12,000 kg kg, max. coil Ø 1,800 mm, spindle Ø min./max. 470/520 mm, rotatable, pit-mounted, hydr. strip insertion aid, hydraulic st...

2007 Presstek 52

• Manufacturer: Presstek

Mod. 52DI＜＞* 20 Point Stock＜＞* 5 Point Type＜＞* Waterless＜＞* 300 Line Screens＜＞* Large Four Form Roller Inker＜＞* Steam Feeder＜＞* Preloader＜＞* Pull Guides＜＞* Enhanced Powder Spray＜＞* Full Automation＜＞* Viewing Boot...

2024 Borema Complete Hand-Sorting Plant with Feed Bunker and Conveyor System

• Manufacturer: Borema

Technical Conditions - Application: Outdoor, temperature range –10°C to +40°C, weather-protected - Operation: 8 hrs/day, 1-shift (06:00–18:00) - Material: Pre-sorted KVA (waste incineration slag), 0–500 mm, mixe...

2011 RYOBI 750-1 Wide

• Manufacturer: Ryobi
• Model: 750
• Size: 765x545 mm

RYOBI 751(SW-1-E WITH UV CASTING) (415V, 50HZ, 3PH) ＜＞- 1 X INLINE UV CASTING AND FOILING UNIT＜＞- 1 X UV DRYER POSITION CHANGE KIT BETWEEN DELIVERY END AND UV CASTING UNIT＜＞- 1 X DELIVERY END UV DRYER＜＞- 1 X 1 SE...

2019 BOBST Novacut 106-E

• Manufacturer: Bobst - Rotomec
• Maximum sheet size: 740x1060 mm

Non-Elevated＜＞High Speed machine at 8,000 Sheets per Hour＜＞Micrometric and quick lock in stripping＜＞Both board and corrugation attachments are present＜＞Side gauge push and pull type are present＜＞Two chases and 5 ...

2016 GALLUS TCS 250

• Manufacturer: Gallus
• Model: TCS 250

Trimming and Suction＜＞Drying＜＞ Model: Uviterno Coldstar＜＞ Water cooled＜＞ IR or UV: UV＜＞Finishing＜＞ Coating Units: 1＜＞ Rotary Die Cutter Units: 1＜＞ Rotary Embossing Unit: 1＜＞Compensating＜＞ Web Inspection＜＞ Web Ins...