Used processing in 4500 Solothurn, Switzerland

1987 PLATARG 912 Ref No: 43443

• Manufacturer: PLATARG

Standard Flat Plate Lifter Cams 13 Stations, 12 Rams + 1 Slave 6.50" (165 mm) long Stroke - checked and confirmed 3.11" (79mm) depth of draw Wedge Adjustable Rams with Standard Male Thread Tool Holders Platarg st...

2024 VAPTECH PE400D Ref No: 41094

• Manufacturer: VAPTECH

New press - can be completed within 1 month Object: 41094 | Drive system: eccentric / crank | Total force (nominal): 400 to | Table surface (left-right): 2470 mm | Table surface (front-back): 1250 mm | Stroke:...

2007 FEINTOOL (SCHMID) HSR 1000 ECO Ref No: 49997

• Manufacturer: Schmid

SIEMENS S7 300 controls Control Panel SIEMENS Panel PC 477B Switch on hours acc. to counter : 62'000 h Total strokes acc. to counter: 3 Mio including Coil line SCHMID HR 12

1987 FEINTOOL HFA 320 Ref No: 42362

• Manufacturer: FEINTOOL

Object: 42362 | Last overhaul: 2019 | Drive system: hydraulic | Total force (nominal): 320 to | Stroke: 30 mm | Stroke rate (max.): 80 /min | Nominal force: 160 to | Lower table (left-right): 630 mm | Lower...

1971 FEINTOOL GKP F 50/80 Ref No: 36213

• Manufacturer: FEINTOOL

Example of an overhauled Feintool GKP 50/80 which can be applied to a machine we have in stock

1981 FEINTOOL GKP F 40 Ref No: 32359

• Manufacturer: FEINTOOL

Object: 32359 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 40 to | Stroke: 45 mm | Stroke rate (max.): 90 /min | Lower table (left-right): 280 mm | Lower table (f...

2002 FEINTOOL HFA 8800 PLUS Ref No: 36813

• Manufacturer: FEINTOOL

Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Returning velocity: 200 mm/s | Nominal force: 6...

1978 FEINTOOL GKP F 250 Ref No: 48186

• Manufacturer: FEINTOOL

Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: ...

1972 FEINTOOL GKP F 100/160 Ref No: 49648

• Manufacturer: FEINTOOL

Object: 49648 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 160 to | Stroke: 13 mm | Stroke rate (max.): 72 /min | Nominal force: 50 to | Lower table (left-right):...

PLATARG 611 Ref No: 40001

• Manufacturer: PLATARG

Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm Maximum speed: 80 spm Example of an overhaule...

1967 WEINGARTEN ARS 100 Ref No: 47690

• Manufacturer: Weingarten
• Model: ARS 100

for safe tools only Object: 47690 | Drive system: eccentric / crank | Frame design: C-frame, single sided | Total force (nominal): 100 to | Slide force: 100 to | Stroke rate (max.): 72 /min | Slide adjustment:...

1992 MIOS 100 Ref No: 47214

• Manufacturer: Mios

Object: 47214 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Total force (nominal): 100 to | Table surface (left-right): 540 mm | Table surface (front-back): 350 ...

SCHULER PDR 250-500 Ref No: 43587

• Manufacturer: Schuler
• Model: PDR 250-500

Object: 43587 | Last overhaul: 2002 | Drive system: eccentric / crank | Frame design: C-frame, single sided | Opening in table: yes | Total force (nominal): 250 to | Table surface (left-right): 800 mm | Table ...

1980 BETZ EZL 300 Ref No: 40715

• Manufacturer: BETZ

approved for single stroke Safety valve make Herion Pneumatic clutch make Desch Motor grease - central lubrication ram weight - compensation cylinder Motorized height adjustment T-slots in the ram Freestanding co...

STRIP STRAIGHTENING MACHINE “HFA” TYPE JMS-100

SKU: 2200038